From beb96c8504bf0102720b6c202c0467ff1557b5f1 Mon Sep 17 00:00:00 2001
From: dbroqua <dbroqua@mousur.org>
Date: Sun, 9 Jul 2017 12:35:55 +0200
Subject: [PATCH] Updated readme

---
 README.md | 60 +++++++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 49 insertions(+), 11 deletions(-)

diff --git a/README.md b/README.md
index e734889..9339710 100644
--- a/README.md
+++ b/README.md
@@ -1,27 +1,64 @@
 # DK60TP
-Mechanical keyboard based on HHKB layout with Trackpoint and some other features.
+Mechanical keyboard with backlit, rgb underglow and Trackpoint support.
 
 :warning: Still in development :warning:
 
 ## Features
-- Poker case compatible (if you don't use IBM Trackpoint)
+- Poker case compatible (if you don't use Trackpoint)
 - IBM Trackpoint
 - Many layouts
 - Backlit
 - RGB underglow
 - Open Hardware
 
+## Supported layouts
+
 ![Layout](./Previews/DK60TP.png "Layout")
 
-## Previews
+## PCB render
 
 ![PCB](./Previews/BACK.png "PCB")
 
 ![PCB](./Previews/FRONT.png "PCB Front")
 
+## Customisation
+
+DK60TP allows some customisations like RGB underglow and caps lock led.
+
+### Capslock led
+
+Capslock led can be tuned to :
+* enable internal led
+* disabled it
+* use external led
+
+To do this you need to play with the 3 pins connector placed near the reset button.
+
+#### Pinout
+* 1 : +Vled
+* 2 : Integrated led
+* 3 : GND
+
+#### Example
+
+##### Integrated led
+Place a jumper between pin 1 and 2.
+
+##### External led
+Connect your led and resistor between pin 1 and 3.
+
+##### Disable led
+Remove the jumper or place it between pin 2 and 3.
+
+### RGB underglow
+
+To add more leds (use WS2812B with capacitor) simply use `RGB` connector on the mainboard.
+
+:warning: Do not connect `RGB` connector if you use the second PCB (those with mouse buttons).
+
 ## Firmware
 
-DK60TP still in development and does not have actually associate firmware, but will be supported by QMK firmware.
+DK60TP still in development and for now does not have associate firmware, but it will be supported by QMK firmware.
 
 ## Used softwares
 I've only used Open Source software to make all parts of this project.
@@ -34,13 +71,14 @@ List of used softwares:
 * ...
 
 ## Third party
-Libraries and Footprint are provided by Hasu, /u/techieee, mohitg11 and me.
+Libraries and footprints are provided by Hasu, /u/techieee, mohitg11 and me.
 
 ## External links
 
-* PCB guide: https://github.com/ruiqimao/keyboard-pcb-guide
-* Hasu's lib: https://github.com/tmk/kicad_lib_tmk
-* Hasu's footprint https://github.com/tmk/keyboard_parts.pretty
-* /u/techieee's footprint: https://github.com/egladman/keebs.pretty
-* mohitg11's footprint and Libraries: https://github.com/mohitg11/TS65AVR
-* Plate generator: http://builder.swillkb.com/
+* [PCB guide](https://github.com/ruiqimao/keyboard-pcb-guide)
+* [Hasu's lib](https://github.com/tmk/kicad_lib_tmk)
+* [Hasu's footprint](https://github.com/tmk/keyboard_parts.pretty)
+* [/u/techieee's footprint](https://github.com/egladman/keebs.pretty)
+* [mohitg11's footprints and libraries](https://github.com/mohitg11/TS65AVR)
+* [Plate generator](http://builder.swillkb.com/)
+* [QMK Firmware](https://github.com/qmk/qmk_firmware)