# DK60TP Light
Mechanical keyboard with backlit and Trackpoint support.

The light version does not include RGB underglow.

:warning: Still in development :warning:

## Features
- Poker case compatible (if you don't use Trackpoint)
- IBM Trackpoint
- Many layouts
- Backlit
- Open Hardware

## Supported layouts

![Layout](./Previews/DK60TP.png "Layout")

## PCB render

![PCB](./Previews/BACK.png "PCB")

![PCB](./Previews/FRONT.png "PCB Front")

## Features

DK60TP allows some customisations like  caps lock led or mouse emulation by using trackpoint.

For all pinout above, `pin 1` is represented by the square hole.

### Trackpoint

To use trackpoint you need to connect the `MOUSE PCB` with the `MAIN PCB`. Trackpoint need to be connected to the `MOUSE PCB`.

#### Pinout

1. Vcc
2. GND
3. D2 (data)
4. reset
5. D5 (clock)

### Capslock led

Capslock led can be tuned to :
* enable internal led
* disabled it
* use external led

To do this you need to play with the 3 pins connector placed near the reset button.

#### Pinout

* 1: +Vled (square pin)
* 2: Integrated led
* 3: GND

#### Example

##### Integrated led
Place a jumper between pin 1 and 2.

##### External led
Connect your led between pin 1 and 3.

##### Disable led
Remove the jumper or place it between pin 2 and 3.

## Firmware

DK60TP still in development and for now does not have associate firmware, but it will be supported by QMK firmware.

## Used softwares
I've only used Open Source software to make all parts of this project.

List of used softwares:
* OS: Debian
* Kicad
* QCad
* Freecad
* ...

## Third party
Libraries and footprints are provided by Hasu, /u/techieee, mohitg11 and me.

## External links

* [PCB guide](https://github.com/ruiqimao/keyboard-pcb-guide)
* [Hasu's lib](https://github.com/tmk/kicad_lib_tmk)
* [Hasu's footprint](https://github.com/tmk/keyboard_parts.pretty)
* [/u/techieee's footprint](https://github.com/egladman/keebs.pretty)
* [mohitg11's footprints and libraries](https://github.com/mohitg11/TS65AVR)
* [Trackpoing pinout on alonswartz github](https://github.com/alonswartz/trackpoint)
* [Plate generator](http://builder.swillkb.com/)
* [QMK Firmware](https://github.com/qmk/qmk_firmware)

## Kicad tips

* Usergrid (for MX placement): 0.09375 inches
* Usergrid (for Led placement): 0.1968504 inches
* Gap between Grid origin and edge cut: 
   - X: 0.53
   - Y: 0.50 mm