43 lines
1.6 KiB
Markdown
43 lines
1.6 KiB
Markdown
|
## M2 Connector (P2)
|
||
|
|
M.2, formerly known as the Next Generation Form Factor (NGFF), is a specification for internally mounted computer expansion cards and associated connectors. M.2 replaces the mSATA standard, which uses the PCI Express Mini Card physical card layout and connectors.
|
||
|
|
|
||
|
|
---TBU---
|
||
|
|
|
||
|
|
### Pinout Table
|
||
|
|
Helios64 provides UEXT on header P2 which following the UEXT standard, containing UEXT, SPI, and I2C connector.
|
||
|
|
You can find the P2 header from the connector/interface list at [hardware overview](/helios64/hardware) page.
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
Below is the detailed description of UEXT header pinout:
|
||
|
|
|
||
|
|
| PIN | Port | Remarks |
|
||
|
|
|-----|------|-------------|
|
||
|
|
|1 |3.3V|
|
||
|
|
|2 |GND|
|
||
|
|
|3 |TXD (UART)|
|
||
|
|
|4 |RXD (UART)|
|
||
|
|
|5 |SCL (I2C)|
|
||
|
|
|6 |SDA (I2C)|
|
||
|
|
|7 |MISO (SPI)|
|
||
|
|
|8 |MOSI (SPI)|
|
||
|
|
|9 |SCK (SPI)|
|
||
|
|
|10 |SSEL (SPI)|
|
||
|
|
|
||
|
|
!!! Warning
|
||
|
|
Please note the UEXT connector at Helios64 board doesn't provide the plastic covering, so be carefull with the header polarity!
|
||
|
|
Make sure your device is correctly oriented before connecting!
|
||
|
|
|
||
|
|
### SPI and I2C
|
||
|
|
|
||
|
|
---linked to SPI and I2C pages, TBU---
|
||
|
|
|
||
|
|
### Exception
|
||
|
|
|
||
|
|
We have connected the UART bus from the RK3399K to the serial console in the USB-C, so there is no dedicated line of UART in the UEXT connector.
|
||
|
|
The UART bus in this UEXT header is the parallel ones with the serial console.
|
||
|
|
Therefore if you connect some module which might ***require dedicated serial UART line*** to the RK3399K, this module ***will not be detected***.
|
||
|
|
|
||
|
|
!!! Notes
|
||
|
|
Please note also, that GSM modules in UEXT format also will not work due to similar reason.
|