kobol-wiki/docs/kit.md

223 lines
6.1 KiB
Markdown
Raw Normal View History

2017-11-27 13:31:35 +01:00
## Helios4 Full Kit content
* Helios4 Board
* Acrylic casing + screw kit
* 2× 70mm PWM ball bearing FAN
* 4× SATA Data Cable
* 2× Molex to dual SATA Power Cable
* AC/DC Adapter (Input:100-240VAC 50/60Hz, Output: DC 12V/8A) + AC Cable
2017-11-27 13:31:35 +01:00
![Kit Assembly](/img/kit/assembly_pic1.jpg)
## What you need
* Phillips #2 Screwdriver
* Scissors
* At least 2x HDD 3.5"
* Some patience...
![Kit Assembly](/img/kit/assembly_pic2.jpg)
## Assembly quick overview
<iframe width="420" height="315"
2017-11-11 09:33:57 +01:00
src="https://www.youtube.com/embed/og2ssRhCrnI">
</iframe>
2017-11-27 13:31:35 +01:00
## **Step 1** - Preparing acrylic plates
![Kit Assembly](/img/kit/assembly_pic3.jpg)
> **Each acrylics plate is recovered with a protective layer on both sides. Peel the protective layers slowly and insure no left-over sticks to the plate.**
![Kit Assembly](/img/kit/assembly_pic4.jpg)
2017-12-28 11:23:46 +01:00
> **Because of the die-cut intricacy of the front panel, the laser cut process might have left the scrap pieces in place. You will have to use a a tool (e.g a pen or a flat screwdriver) to push out the scrap pieces. You might have to do the same for some of the screw holes on the other plates.**
2017-11-27 13:31:35 +01:00
!!! important
This task requires the most patience. Don't rush it or you risk to damage it.
2017-11-27 13:31:35 +01:00
![Kit Assembly](/img/kit/assembly_pic5.jpg)
![Kit Assembly](/img/kit/assembly_pic6.jpg)
> **Congratulation you have completed the most annoying part.**
![Kit Assembly](/img/kit/assembly_pic7.jpg)
## **Step 2** - HDD cage assembly
> **Get the HDD screws from the screw kit.**
![Kit Assembly](/img/kit/assembly_pic8.jpg)
![Kit Assembly](/img/kit/assembly_pic9.jpg)
> **Position your HDD exactly as shown below.**
![Kit Assembly](/img/kit/assembly_pic10.jpg)
> **Position one of the acrylic side plate on top of your HDDs. Align the holes.**
![Kit Assembly](/img/kit/assembly_pic11.jpg)
2017-11-27 13:31:35 +01:00
!!! important
Pay attention to the orientation of the acrylic side plate. You don't want to realize too late a mistake and restart the assembly from the beginning.
![Kit Assembly](/img/kit/assembly_pic11_help.jpg)
2017-11-27 13:31:35 +01:00
> **Screw the side plate to the HDDs. Don't tighten too hard.**
![Kit Assembly](/img/kit/assembly_pic12.jpg)
![Kit Assembly](/img/kit/assembly_pic13.jpg)
> **Flip side the assembly.**
![Kit Assembly](/img/kit/assembly_pic14.jpg)
![Kit Assembly](/img/kit/assembly_pic15.jpg)
> **Position the order acrylic side plate on top of your HDDs. Align the holes.**
!!! important
Pay attention to the orientation of the acrylic side plate. You don't want to realize too late a mistake and restart the assembly from the beginning.
2017-11-27 13:31:35 +01:00
![Kit Assembly](/img/kit/assembly_pic16.jpg)
> **Screw the side plate to the HDDs. Don't tighten too hard.**
![Kit Assembly](/img/kit/assembly_pic17.jpg)
> **Position the HDD cage stand-up and tighten all the screws.**
!!! note
The cage should sit perfectly level. If not then loose the HDDs screws a bit till it sit flat and re-tighten the screws.
![Kit Assembly](/img/kit/assembly_pic18.jpg)
## **Step 3** - Fan plate assembly
> **Prepare the following items.**
![Kit Assembly](/img/kit/assembly_pic19.jpg)
> **Position the fans exactly as shown below.**
![Kit Assembly](/img/kit/assembly_pic20.jpg)
> **Position the acrylic fan plate on top of the fans. Align the holes.**
2017-11-27 13:31:35 +01:00
!!! important
Pay attention to the orientation of the fan plate. You don't want to realize too late a mistake and restart the assembly from the beginning.
![Kit Assembly](/img/kit/assembly_pic21.jpg)
> **Screw the fan plate to the fans.<br>Tighten the cables to the fan plate with the provided cable zips.**
![Kit Assembly](/img/kit/assembly_pic22.jpg)
> **Cut the loose parts of cable zips.**
![Kit Assembly](/img/kit/assembly_pic23.jpg)
## **Step 4** - Board plate assembly
> **Prepare the following items.**
![Kit Assembly](/img/kit/assembly_pic24.jpg)
![Kit Assembly](/img/kit/assembly_pic25.jpg)
![Kit Assembly](/img/kit/assembly_pic26.jpg)
> **Install the standoffs on the board plate using the 5mm long screws.**
![Kit Assembly](/img/kit/assembly_pic27.jpg)
![Kit Assembly](/img/kit/assembly_pic28.jpg)
> **Position Helios4 board on the plate. Align the holes.**
![Kit Assembly](/img/kit/assembly_pic29.jpg)
> **Screw Helios4 board with the 4mm long screws.**
![Kit Assembly](/img/kit/assembly_pic30.jpg)
> **Configure the boot mode dipswitch as shown in the picture. (More info [here](/hardware/#boot-modes))**
![Kit Assembly](/img/kit/assembly_pic31.jpg)
> **Configure the led mode dipswitch as show in the picture. (More info [here](/hardware/#led-indicators))**
![Kit Assembly](/img/kit/assembly_pic32.jpg)
## **Step 5** - Board cabling
> **Prepare the following items.**
![Kit Assembly](/img/kit/assembly_pic33.jpg)
> **Connect the SATA cables as shown below.**
![Kit Assembly](/img/kit/assembly_pic34.jpg)
> **Connect the fan cables as shown below.**
![Kit Assembly](/img/kit/assembly_pic35.jpg)
![Kit Assembly](/img/kit/assembly_pic35b.jpg)
2017-11-27 13:31:35 +01:00
## **Step 6** - Casing assembly 1/2
> **Prepare and position the items as shown below.**
![Kit Assembly](/img/kit/assembly_pic36.jpg)
> **Slot in the board plate into the HDD cage.**
![Kit Assembly](/img/kit/assembly_pic37.jpg)
!!! note
You will have to pull-up the side plate in order to slot in the board plate.
2017-11-27 13:31:35 +01:00
![Kit Assembly](/img/kit/assembly_anim1.gif)
![Kit Assembly](/img/kit/assembly_pic38.jpg)
> **Position the assembly stand-up.**
![Kit Assembly](/img/kit/assembly_pic39.jpg)
> **Slide in the fan plate.**
![Kit Assembly](/img/kit/assembly_anim2.gif)
## **Step 7** - HDDs cabling
![Kit Assembly](/img/kit/assembly_pic40.jpg)
> **Insert the SATA cables as shown below.**
![Kit Assembly](/img/kit/assembly_pic41.jpg)
![Kit Assembly](/img/kit/assembly_pic42.jpg)
## **Step 8** - Casing assembly 2/2
> **Prepare the following items.**
![Kit Assembly](/img/kit/assembly_pic43.jpg)
!!! note
You will have to push the HDD cables inside in order the slide in the front panel.
2017-11-27 13:31:35 +01:00
> **Slide in front plate.**
![Kit Assembly](/img/kit/assembly_pic44.jpg)
> **Slide in top plate.**
![Kit Assembly](/img/kit/assembly_pic45.jpg)
## What to do next ?
AWESOME !!! You have completed Helios4 Kit Assembly.
2017-11-27 13:31:35 +01:00
**Now you can jump to the [install section](/install).**
![Kit Assembly](/img/kit/assembly_pic46.jpg)