dbroqua/kobol-wiki
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

helios64: Added temp sensor and fancontrol to PWM page

Browse source
This commit is contained in:
Aditya Prayoga 2020-10-16 14:43:28 +07:00
parent 7b9bea6083
commit 329c53fa36
1 changed files with 115 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

116
docs/helios64/pwm.md
View file

@ -35,7 +35,7 @@ The term *duty cycle* describes the proportion of 'on' time to the regular inter
## PWM Fan Connector ## PWM Fan Connector
![Fan Connector](/helios4/img/pwm/fan_connector.png) ![Fan Connector](/helios64/img/pwm/fan_connector.png)
Connector Pinout Connector Pinout
@ -45,3 +45,117 @@ Connector Pinout
| 2 | 12V | Red | | 2 | 12V | Red |
| 3 | Sense | Yellow | | 3 | Sense | Yellow |
| 4 | Control | Blue | | 4 | Control | Blue |
## Helios64 Temperature Sensors
### SoC Temperature Sensor
RK3399 has internal temperature sensor (TS-ADC) for monitoring die temperature. The system has two Temperature Sensors, channel 0 is for CPU, channel 1 is for GPU.
The sensor has -40~125°C temperature range and 5°C temperature resolution.
### Board Temp Sensor
Helios64 has a **Digital Temperature Sensor with 2‐wire Interface** ([NCT75 Datasheet](https://www.onsemi.com/pub/Collateral/NCT75-D.PDF)), located on top side of the board near RTC battery. It is used to read ambient temperature.
## PWM Fan Control under Linux
Linux use 8-bit integer to represent duty cycle. PWM value 0 represent 0% duty cycle and PWM value 255 represent 100% duty cycle.
### Using SYSFS interface
Linux export the fan control mechanism to SYSFS under hwmon class.
List of devices can be checked under /sys/class/hwmon
```
ls -l /sys/class/hwmon/
total 0
lrwxrwxrwx 1 root root 0 Oct 16 08:38 hwmon0 -> ../../devices/virtual/thermal/thermal_zone0/hwmon0
lrwxrwxrwx 1 root root 0 Oct 16 08:38 hwmon1 -> ../../devices/virtual/thermal/thermal_zone1/hwmon1
lrwxrwxrwx 1 root root 0 Oct 16 08:38 hwmon2 -> ../../devices/platform/ff120000.i2c/i2c-2/2-004c/hwmon/hwmon2
lrwxrwxrwx 1 root root 0 Oct 16 09:29 hwmon3 -> ../../devices/platform/gpio-charger/power_supply/gpio-charger/hwmon3
lrwxrwxrwx 1 root root 0 Oct 16 09:29 hwmon4 -> ../../devices/platform/p7-fan/hwmon/hwmon4
lrwxrwxrwx 1 root root 0 Oct 16 09:29 hwmon5 -> ../../devices/platform/p6-fan/hwmon/hwmon5
lrwxrwxrwx 1 root root 0 Oct 16 09:29 hwmon6 -> ../../devices/platform/ff3d0000.i2c/i2c-4/4-0022/power_supply/tcpm-source-psy-4-0022/hwmon6
```
!!! info
The numbering may different from above example output. It depends on whether the driver built as kernel module or built-in, device initialization order. Take this as consideration when using [fancontrol](#fancontrol-automated-software-based-fan-speed-control)
To identify which hwmon belong to fan, look for *p6-fan* and *p7-fan*. On above example
```
hwmon4 -> ../../devices/platform/p7-fan/hwmon/hwmon4
hwmon5 -> ../../devices/platform/p6-fan/hwmon/hwmon5
```
To read current PWM
```
cat /sys/class/hwmon4/pwm1
cat /sys/class/hwmon5/pwm1
```
To set PWM
```
echo NEW_PWM_VALUE > /sys/class/hwmon4/pwm1
echo NEW_PWM_VALUE > /sys/class/hwmon5/pwm1
```
### Fancontrol - automated software based fan speed control
fancontrol is a shell script for use with lm_sensors. It reads its configuration from a file, then calculates fan speeds from temperatures and sets the corresponding PWM outputs to the computed values.
```
sudo apt-get install fancontrol
```
fancontrol includes *pwmconfig* script to create automatically a configuration file but it can not be used for Helios64.
#### UDEV rules
Since hwmon order can be changed between kernel version or even between reboot, on Armbian we use udev rules as workaround. The rules can be found from [here](https://raw.githubusercontent.com/armbian/build/master/packages/bsp/helios64/90-helios64-hwmon.rules) (mainline) or [here](https://raw.githubusercontent.com/armbian/build/master/packages/bsp/helios64/90-helios64-hwmon-legacy.rules) (legacy kernel 4.4) and to be copied to **/etc/udev/rules.d/**
*/dev/fan-p6, /dev/fan-p7, /dev/thermal-cpu* and */dev/thermal-board* are symlinks generated by the udev rules.
#### Configuration File
fancontrol uses **/etc/fancontrol** as configuration file. Below is an example configuration to control fan speed on Helios64.
```
# Helios64 PWM Fan Control Configuration
# Temp source : /dev/thermal-cpu
INTERVAL=10
FCTEMPS=/dev/fan-p6/pwm1=/dev/thermal-cpu/temp1_input /dev/fan-p7/pwm1=/dev/thermal-cpu/temp1_input
MINTEMP=/dev/fan-p6/pwm1=40 /dev/fan-p7/pwm1=40
MAXTEMP=/dev/fan-p6/pwm1=80 /dev/fan-p7/pwm1=80
MINSTART=/dev/fan-p6/pwm1=60 /dev/fan-p7/pwm1=60
MINSTOP=/dev/fan-p6/pwm1=29 /dev/fan-p7/pwm1=29
MINPWM=20
```
INTERVAL
This variable defines at which interval in seconds the main loop of fancontrol will be executed.
FCTEMPS
Maps PWM outputs to temperature sensors so fancontrol knows which temperature sensors should be used for calculation of new values for the corresponding PWM outputs.
Fans (**fan-p6** & **fan-p7**) are controlled based on CPU thermal sensor (**thermal-cpu**) reading.
-----
*Following settings can be adjusted by user to tweak further.*
MINTEMP
The temperature below which the fan gets switched to minimum speed.
Fans (fan-p6 & fan-p7) runs in minimum speed if the CPU temperature below **40** degree C.
MAXTEMP
The temperature over which the fan gets switched to maximum speed.
Fans (fan-p6 & fan-p7) runs in maximum speed if the CPU temperature above **80** degree C.