Add Kit Assembly Guide

docs/kit.md

@@ -1,6 +1,220 @@
 !!! info
     Wiki edition in progress
 
+## Helios4 Full Kit content
+
+* Helios4 Board
+* Acrylic casing + screw kit
+* 2× 70mm PWM ball bearing FAN
+* 4× SATA Data Cable
+* 2× Molex to dual SATA Power Cable
+* AC Adapter (12V/8A) + AC Cable
+
+![Kit Assembly](/img/kit/assembly_pic1.jpg)
+
+## What you need
+
+* Phillips #2 Screwdriver
+* Scissors
+* At least 2x HDD 3.5"
+* Some patience...
+
+![Kit Assembly](/img/kit/assembly_pic2.jpg)
+
+## Assembly quick overview
+
 <iframe width="420" height="315"
   src="https://www.youtube.com/embed/og2ssRhCrnI">
 </iframe>
+
+
+## **Step 1** - Preparing acrylic plates
+
+![Kit Assembly](/img/kit/assembly_pic3.jpg)
+
+> **Each acrylics plate is recovered with a protective layer on both sides. Peel the protective layers slowly and insure no left-over sticks to the plate.**
+
+![Kit Assembly](/img/kit/assembly_pic4.jpg)
+
+!!! important
+    The following plate requires the most patience. Don't rush it or you risk to damage it.
+
+> **Because of the die-cut intricacy of the front panel, the laser cut process might have left the scrap pieces in place. You will have to use a a tool (e.g a pen or a flat screwdriver) to push out the scrap pieces.**  
+
+![Kit Assembly](/img/kit/assembly_pic5.jpg)
+![Kit Assembly](/img/kit/assembly_pic6.jpg)
+
+> **Congratulation you have completed the most annoying part.**
+
+![Kit Assembly](/img/kit/assembly_pic7.jpg)
+
+## **Step 2** - HDD cage assembly
+
+> **Get the HDD screws from the screw kit.**
+
+![Kit Assembly](/img/kit/assembly_pic8.jpg)
+![Kit Assembly](/img/kit/assembly_pic9.jpg)
+
+> **Position your HDD exactly as shown below.**
+
+![Kit Assembly](/img/kit/assembly_pic10.jpg)
+
+!!! important
+    Pay attention to the orientation of the acrylic side plate. You don't want to realize too late a mistake and restart the assembly from the beginning.
+
+> **Position one of the acrylic side plate on top of your HDDs. Align the holes.**
+
+![Kit Assembly](/img/kit/assembly_pic11.jpg)
+
+> **Screw the side plate to the HDDs. Don't tighten too hard.**
+
+![Kit Assembly](/img/kit/assembly_pic12.jpg)
+![Kit Assembly](/img/kit/assembly_pic13.jpg)
+
+> **Flip side the assembly.**
+
+![Kit Assembly](/img/kit/assembly_pic14.jpg)
+![Kit Assembly](/img/kit/assembly_pic15.jpg)
+
+!!! important
+    Pay attention to the orientation of the acrylic side plate. You don't want to realize too late a mistake and restart the assembly from the beginning.
+
+> **Position the order acrylic side plate on top of your HDDs. Align the holes.**
+
+
+![Kit Assembly](/img/kit/assembly_pic16.jpg)
+
+> **Screw the side plate to the HDDs. Don't tighten too hard.**
+
+![Kit Assembly](/img/kit/assembly_pic17.jpg)
+
+> **Position the HDD cage stand-up and tighten all the screws.**
+
+!!! note
+     The cage should sit perfectly level. If not then loose the HDDs screws a bit till it sit flat and re-tighten the screws.
+
+![Kit Assembly](/img/kit/assembly_pic18.jpg)
+
+## **Step 3** - Fan plate assembly
+
+> **Prepare the following items.**
+
+![Kit Assembly](/img/kit/assembly_pic19.jpg)
+
+> **Position the fans exactly as shown below.**
+
+![Kit Assembly](/img/kit/assembly_pic20.jpg)
+
+!!! important
+    Pay attention to the orientation of the fan plate. You don't want to realize too late a mistake and restart the assembly from the beginning.
+
+> **Position the acrylic fan plate on top of the fans. Align the holes.**
+
+![Kit Assembly](/img/kit/assembly_pic21.jpg)
+
+
+> **Screw the fan plate to the fans.<br>Tighten the cables to the fan plate with the provided cable zips.**
+
+![Kit Assembly](/img/kit/assembly_pic22.jpg)
+
+> **Cut the loose parts of cable zips.**
+
+![Kit Assembly](/img/kit/assembly_pic23.jpg)
+
+## **Step 4** - Board plate assembly
+
+> **Prepare the following items.**
+
+![Kit Assembly](/img/kit/assembly_pic24.jpg)
+![Kit Assembly](/img/kit/assembly_pic25.jpg)
+![Kit Assembly](/img/kit/assembly_pic26.jpg)
+
+> **Install the standoffs on the board plate using the 5mm long screws.**
+
+![Kit Assembly](/img/kit/assembly_pic27.jpg)
+![Kit Assembly](/img/kit/assembly_pic28.jpg)
+
+> **Position Helios4 board on the plate. Align the holes.**
+
+![Kit Assembly](/img/kit/assembly_pic29.jpg)
+
+> **Screw Helios4 board with the 4mm long screws.**
+
+![Kit Assembly](/img/kit/assembly_pic30.jpg)
+
+> **Configure the boot mode dipswitch as shown in the picture. (More info [here](/hardware/#boot-modes))**
+
+![Kit Assembly](/img/kit/assembly_pic31.jpg)
+
+> **Configure the led mode dipswitch as show in the picture. (More info [here](/hardware/#led-indicators))**
+
+![Kit Assembly](/img/kit/assembly_pic32.jpg)
+
+## **Step 5** - Board cabling
+
+> **Prepare the following items.**
+
+![Kit Assembly](/img/kit/assembly_pic33.jpg)
+
+> **Connect the SATA cables as shown below.**
+
+![Kit Assembly](/img/kit/assembly_pic34.jpg)
+
+> **Connect the fan cables as shown below.**
+
+![Kit Assembly](/img/kit/assembly_pic35.jpg)
+
+## **Step 6** - Casing assembly 1/2
+
+> **Prepare and position the items as shown below.**
+
+![Kit Assembly](/img/kit/assembly_pic36.jpg)
+
+> **Slot in the board plate into the HDD cage.**
+
+![Kit Assembly](/img/kit/assembly_pic37.jpg)
+
+!!! note
+     You will have pull-up the side plate in order to slot in the board plate.
+
+![Kit Assembly](/img/kit/assembly_anim1.gif)
+![Kit Assembly](/img/kit/assembly_pic38.jpg)
+
+> **Position the assembly stand-up.**
+
+![Kit Assembly](/img/kit/assembly_pic39.jpg)
+
+> **Slide in the fan plate.**
+
+![Kit Assembly](/img/kit/assembly_anim2.gif)
+
+## **Step 7** - HDDs cabling
+
+![Kit Assembly](/img/kit/assembly_pic40.jpg)
+
+> **Insert the SATA cables as shown below.**
+
+![Kit Assembly](/img/kit/assembly_pic41.jpg)
+![Kit Assembly](/img/kit/assembly_pic42.jpg)
+
+## **Step 8** - Casing assembly 2/2
+
+> **Prepare the following items.**
+
+![Kit Assembly](/img/kit/assembly_pic43.jpg)
+
+> **Slide in front plate.**
+
+![Kit Assembly](/img/kit/assembly_pic44.jpg)
+
+> **Slide in top plate.**
+
+![Kit Assembly](/img/kit/assembly_pic45.jpg)
+
+## What to do next ?
+
+**AWESOME !!! You have completed Helios4 Kit Assembly.**
+
+**Now you can jump to the [install section](/install).**
+
+![Kit Assembly](/img/kit/assembly_pic46.jpg)

mkdocs.yml

@@ -59,7 +59,7 @@ pages:
   - Linux : 'linux.md'
   - OpenMediaVault : 'omv.md'
   - Syncloud : 'syncloud.md'
-- Starter kit : 'kit.md'
+- Kit Assembly: 'kit.md'
 - Download: 'download.md'
 - Install: 'install.md'
 - Development: 'dev.md'