Fix page link. Add '/' when needed.

Add .gitignore file

.gitignore

@@ -0,0 +1 @@
+site/

docs/download.md

@@ -50,13 +50,13 @@ All images are generated by [Armbian](https://www.armbian.com/helios4/) build fr
 
     **Temporary workaround :** Disable UHS option/support.
 
-    *Can be manually enable, refer to the following [page](/helios4/sdcard).*
+    *Can be manually enable, refer to the following [page](/helios4/sdcard/).*
 
 - During SATA heavy load, accessing SPI NOR Flash will generate ATA errors.
 
     **Temporary workaround :** Disable SPI NOR flash.
 
-    *Can be manually enable, refer to the following [page](/helios4/spi).*
+    *Can be manually enable, refer to the following [page](/helios4/spi/).*
 
 
 ### Image List

docs/helios4/arch.md

@@ -51,7 +51,7 @@ Once you get an Arch Linux ARM image, follows these instructions to use it on He
 
 ### Writing image / power-up Helios4 / connecting to serial console
 
-Follows these steps from the Helios4 [install guide](/helios4/install):
+Follows these steps from the Helios4 [install guide](/helios4/install/):
 
 - [step 2](/helios4/install/#step-2-writing-an-image-to-a-microsd-card) to write the Arch Linux ARM image to a microSD card
 - [step 3](/helios4/install/#step-3-power-up-helios4) to power-up Helios4

docs/helios4/freebsd.md

@@ -43,7 +43,7 @@ pv FreeBSD-armv7-12.0-GENERIC-333641-Clearfog.img | sudo tee /dev/sdX >/dev/null
 In an ideal world U-Boot would already be installed in SPI flash, including the necessary patch for FreeBSD. If you happen to have such an ideal system, you may skip the next section
 
 ### Install U-Boot
-Please refer to [U-boot](/helios4/uboot) for build instructions.
+Please refer to [U-boot](/helios4/uboot/) for build instructions.
 
 The Boot-ROM expects to find U-Boot at 512 bytes into the sdcard. Assuming your SD-Card is available at /dev/sdX, write the u-boot binary to it using dd:
 ```bash

docs/helios4/hardware.md

@@ -42,7 +42,7 @@ Helios4 supports 4 boot modes that can be chosen by using the dipswitch SW1.
 
 All the ready-to-use images we provide are for the **SD Card** boot mode.
 
-Please refer to [U-boot](/helios4/uboot) section to know how to use the other modes.
+Please refer to [U-boot](/helios4/uboot/) section to know how to use the other modes.
 
 ## LED indicators
 

docs/helios4/install.md

@@ -1,5 +1,5 @@
 !!! note
-    Go to [Kit Assembly](/helios4/kit) to find out how to put together your Helios4 NAS
+    Go to [Kit Assembly](/helios4/kit/) to find out how to put together your Helios4 NAS
 
 ## **What you need before you start.**
 
@@ -199,7 +199,7 @@ You can now connect by SSH to your Helios4 to carry on with your configuration.
 
 ## **What to do next ?**
 
-If you want to install OpenMediaVault, the next-gen network attached storage (NAS) software, refer to the [OMV](/helios4/omv) page.
+If you want to install OpenMediaVault, the next-gen network attached storage (NAS) software, refer to the [OMV](/helios4/omv/) page.
 
 If you have assembled an OLED Display as part of your Helios4 setup, it can be the right time to set it up. Refer to the following [section](/helios4/i2c/#sys-oled-application) that will explain you how to install the **sys-oled** application which control the OLED display.
 

docs/helios4/intro.md

@@ -63,15 +63,15 @@ The **Marvell ARMADA® 388** is a robust and energy-efficient System on Chip (So
 
 Once you have received your Helios4, this wiki will run you through all the necessary steps to setup your system.
 
-1. [Kit Assembly](/helios4/kit) - How to put together your Helios4.
+1. [Kit Assembly](/helios4/kit/) - How to put together your Helios4.
 
-2. [Download](/download) - Get the latest OS build to install.
+2. [Download](/download/) - Get the latest OS build to install.
 
-3. [Install](/helios4/install) - 1st startup and set-up instructions.
+3. [Install](/helios4/install/) - 1st startup and set-up instructions.
 
-4. [Software](/helios4/omv) - Collection of tutorials on different 3rd party applications.
+4. [Software](/helios4/omv/) - Collection of tutorials on different 3rd party applications.
 
-5. [Hardware](/helios4/hardware) - Understand Helios4 hardware and take advantage of all its features.
+5. [Hardware](/helios4/hardware/) - Understand Helios4 hardware and take advantage of all its features.
 
 ### Armbian Support Forum
 

docs/helios4/kit.md

@@ -317,6 +317,6 @@ Since Helios4 Batch 3 we added to the Kit an OLED Display kit containing
 
 AWESOME !!! You have completed Helios4 Kit Assembly.
 
-**Now you can jump to the [install section](/helios4/install).**
+**Now you can jump to the [install section](/helios4/install/).**
 
 ![Kit Assembly](/helios4/img/kit/assembly_pic57.jpg)

docs/helios4/nextcloud.md

@@ -4,7 +4,7 @@ In this tutorial we will install and configure Nextcloud 16 on a Debian 9 (Stret
 
 ## Step 0 - Requirements
 
-* You should have Debian 9 (Stretch) or Debian 10 (Buster) running on your Helios4. Refer to [Install](/helios4/install) page for instructions.
+* You should have Debian 9 (Stretch) or Debian 10 (Buster) running on your Helios4. Refer to [Install](/helios4/install/) page for instructions.
 
 * Under Debian 9 (Stretch) you will need first to add *deb.sury.org* repo in order to get access to PHP 7.3 packages.
 
@@ -14,7 +14,7 @@ echo "deb https://packages.sury.org/php/ stretch main" | sudo tee /etc/apt/sourc
 sudo apt-get update
 ```
 
-* You should have setup your storage. This guide will assume you have setup a RAID array mounted to **/mnt/md0**. Refer to [Mdadm](/helios4/mdadm) page for guideline on how to setup a RAID array.
+* You should have setup your storage. This guide will assume you have setup a RAID array mounted to **/mnt/md0**. Refer to [Mdadm](/helios4/mdadm/) page for guideline on how to setup a RAID array.
 
 ## Step 1 - Install Apache2
 

docs/helios4/spi.md

@@ -7,7 +7,7 @@ By default, Helios4 is configured to boot from microSD card. To boot from SPI NO
 
 ## Build U-Boot for SPI NOR flash
 
-Refer to [U-Boot](/helios4/uboot) page to build the image.
+Refer to [U-Boot](/helios4/uboot/) page to build the image.
 
 *A prebuilt SPI image of U-Boot for Armbian OS can be downloaded from [here (version 2013.01)](/helios4/files/uboot/u-boot-armbian-2013.01-spi.bin) or from [here (version 2018.11)](/helios4/files/uboot/u-boot-armbian-2018.11-spi.bin).*
 

docs/helios4/syncloud.md

@@ -6,7 +6,7 @@ You can download latest Syncloud release for Helios4 and other devices [here](ht
 
 ## Prepare microSD Card
 
-Refer to the [Install](/helios4/install) page for instructions on how to prepare your microSD card and how to start and connect to your Helios4.
+Refer to the [Install](/helios4/install/) page for instructions on how to prepare your microSD card and how to start and connect to your Helios4.
 
 ## Activate Syncloud
 
@@ -40,7 +40,7 @@ Install Syncloud app on your smartphone and use it to find and activate your Syn
 ## Configure storage
 
 !!! note
-    You might want first to setup your RAID array before configuring the storage in Syncloud. Refer to the following [Mdadm](/helios4/mdadm) page for guideline on how to setup a RAID array. The credentials to connect via SSH to Helios4 are described [here](/helios4/syncloud/#additional-information).
+    You might want first to setup your RAID array before configuring the storage in Syncloud. Refer to the following [Mdadm](/helios4/mdadm/) page for guideline on how to setup a RAID array. The credentials to connect via SSH to Helios4 are described [here](/helios4/syncloud/#additional-information).
 
 First thing you will need to do is to activate the storage you want to use.
 

docs/helios64/button.md

@@ -3,7 +3,7 @@
 ![Button Location](img/button/button.jpg)
 
 !!! note
-    All the above on-board buttons are also exposed on the [Front Panel](/helios64/front-panel).
+    All the above on-board buttons are also exposed on the [Front Panel](/helios64/front-panel/).
 
 ### Power Button
 

docs/helios64/i2c.md

@@ -76,7 +76,7 @@ This I2C device works with 3 pin bus (SDA, SCL, and GND), and also in band addre
 
 ### UEXT Header (P2)
 
-The I2C Bus 7 can be found on the [UEXT header (P2)](/helios64/uext).
+The I2C Bus 7 can be found on the [UEXT header (P2)](/helios64/uext/).
 
 ![P2 Location](/helios64/img/i2c/uext.jpg)
 

docs/helios64/intro.md

@@ -6,7 +6,7 @@ Helios64 is a powerful ARM board specially designed for Network Attached Storage
 
 ![Helios64](/helios64/img/intro/helios64.png)
 
-Helios64 is our latest design for the ultimate ARM powered NAS. Compared to the [Helios4](/helios4/intro), it offers improvement on every single key aspect :
+Helios64 is our latest design for the ultimate ARM powered NAS. Compared to the [Helios4](/helios4/intro/), it offers improvement on every single key aspect :
 
 * More storage capacity with 5x SATA ports,
 * Greater network throughput with Multi-Gigabit Ethernet (2.5 GbE),

docs/helios64/spi.md

@@ -44,7 +44,7 @@ This flash contains
 |-----|-------------|---------|
 |  2  | 0 | User Application |
 
-SPI Bus for user application is exposed on [UEXT header (P2)](/helios64/uext)
+SPI Bus for user application is exposed on [UEXT header (P2)](/helios64/uext/)
 
 ![P2 Location](/helios64/img/spi/uext.jpg)
 

docs/helios64/uext.md

@@ -33,7 +33,7 @@ Below is the full pinout of the UEXT header:
 Refer to the respective pages directly:
 
 - [SPI](/helios64/hardware/)
-- [I2C](/helios64/I2C/)
+- [I2C](/helios64/i2c/)
 
 ## RS232 (UART)
 

docs/index.md

@@ -10,18 +10,18 @@ Here our existing projects :
 
 ## Helios64
 
-[![Helios64](/helios64/img/intro/helios64.png)](/helios64/intro)
+[![Helios64](/helios64/img/intro/helios64.png)](/helios64/intro/)
 
 * Launch Year : 2020
 * Availability : In-Production
 
-Go to [Helios64 section](/helios64/intro) for more info.
+Go to [Helios64 section](/helios64/intro/) for more info.
 
 ## Helios4
 
-[![Helios4](/helios4/img/intro/helios4.jpg)](/helios4/intro)
+[![Helios4](/helios4/img/intro/helios4.jpg)](/helios4/intro/)
 
 * Launch Year : 2017
 * Availability : End-of-Life
 
-Go to [Helios4 section](/helios4/intro) for more info.
+Go to [Helios4 section](/helios4/intro/) for more info.