Reorder wiki pages to match Helios4 set-up step orders

Add 'where to start' sub-section in intro page.

docs/dev.md

@@ -1,5 +0,0 @@
-Helios4 Github Development Repositories :
-
-* [U-Boot](https://github.com/helios-4/u-boot-marvell)
-* [Linux Kernel](https://github.com/helios-4/linux-marvell)
-* [Armbian Build](https://github.com/helios-4/build)

docs/index.md

@@ -12,22 +12,36 @@ The Helios4 is an open source and open hardware project, therefore our objective
 
 ## Overall Specifications
 
-**Board Specifications**||
+|**Board Specifications**||
----|---
+|------------|-----------|
-CPU Model|Marvell Armada 388 (88F6828)<br>ARM Cortex-A9
+|CPU Model|Marvell Armada 388 (88F6828)<br>ARM Cortex-A9|
-CPU Architecture|ARMv7 32-bit
+|CPU Architecture|ARMv7 32-bit|
-CPU Frequency|Dual Core 1.6 Ghz
+|CPU Frequency|Dual Core 1.6 Ghz|
-Additional Features|- RAID Acceleration Engines<br>- Security Acceleration Engines<br>- Wake-on-LAN
+|Additional Features|- RAID Acceleration Engines<br>- Security Acceleration Engines<br>- Wake-on-LAN|
-System Memory|2GB DDR3L ECC
+|System Memory|2GB DDR3L ECC|
-SATA 3.0 Ports|4
+|SATA 3.0 Ports|4|
-Max Raw Capacity|48 TB (12 TB drive x 4)
+|Max Raw Capacity|48 TB (12 TB drive x 4)|
-GbE LAN Port|1
+|GbE LAN Port|1|
-USB 3.0|2
+|USB 3.0|2|
-microSD (SDIO 3.0)|1
+|microSD (SDIO 3.0)|1|
-GPIO|12
+|GPIO|12|
-I2C|1
+|I2C|1|
-UART|1 (via onboard Micro-USB converter)
+|UART|1 (via onboard Micro-USB converter)|
-Boot Mode Selector|- SPI<br>- SD Card<br>- UART<br>- SATA
+|Boot Mode Selector|- SPI<br>- SD Card<br>- UART<br>- SATA|
-SPI NOR Flash|32Mbit onboard
+|SPI NOR Flash|32Mbit onboard|
-PWM FAN|2
+|PWM FAN|2|
-DC input|12V / 8A
+|DC input|12V / 8A|
+
+## Where to Start ?
+
+Once you have received your Helios4, this wiki will run you through all the necessary steps to setup your system.
+
+1. [Kit Assembly](/kit) - How to put together your Helios4.
+
+2. [Download](/download) - Get the latest OS build to install.
+
+3. [Install](/install) - 1st startup and set-up instructions.
+
+4. [Software](/omv) - Collection of tutorials on different 3rd party applications.
+
+5. [Hardware](/hardware) - Understand Helios4 hardware and take advantage of all its features.

docs/install.md

@@ -178,7 +178,7 @@ You can now connect by SSH to your Helios4 to carry on with your configuration.
 
 If you want to install OpenMediaVault, the next-gen network attached storage (NAS) software, refer to the [OMV](/omv) page.
 
-For other software you can also use **armbian-config** which provides a collection of 3rd party application auto installers.
+For other software you can use **armbian-config** which provides an easy way to install 3rd party applications. You can also refer to our *Software* section to find tutorials that will help you to setup manually your Helios4.
 
 ```bash
 sudo armbian-config
@@ -188,4 +188,4 @@ sudo armbian-config
 
 ![!armbian-config Software](/img/omv/install-2.png)
 
-![!armbian-config Selection](/img/omv/install-3.png)
+![!armbian-config Selection](/img/install/softy.png)

docs/omv.md

@@ -12,7 +12,8 @@ OpenMediaVault (OMV) is a next-gen network attached storage (NAS) software based
 You can easily install OMV with the **armbian-config** tool.
 
 !!! note
-    If you have installed a pre-built OpenMediaVault image you can skip this step. **Important :** pre-built OMV images are now obsoletes.
+    If you have installed a pre-built OpenMediaVault image you can skip this step.<br>
+    **Important :** pre-built OMV images are now obsoletes.
 
 Connect to your Helios4 via SSH as explained [here](/install/#step-7-connect-to-helios4-via-ssh).
 

mkdocs.yml

@@ -58,25 +58,24 @@ markdown_extensions:
 # Page naming
 pages:
 - Introduction: 'index.md'
-- Hardware:
-  - Overview : 'hardware.md'
-  - GPIO : 'gpio.md'
-  - LED : 'led.md'
-  - I2C (OLED) : 'i2c.md'
-  - SPI (NOR Flash) : 'spi.md'
-  - PWM (Fan) : 'pwm.md'
-  - CESA (HW Crypto) : 'cesa.md'
 - Kit Assembly: 'kit.md'
 - Install: 'install.md'
+- Download: 'download.md'
 - Software:
-  - U-Boot : 'uboot.md'
   - Armbian : 'armbian.md'
+  - FreeBSD : 'freebsd.md'
   - Mdadm (RAID) : 'mdadm.md'
   - NextCloud : 'nextcloud.md'
   - OpenMediaVault : 'omv.md'
   - Syncloud : 'syncloud.md'
-  - FreeBSD : 'freebsd.md'
+  - U-Boot : 'uboot.md'
-- Download: 'download.md'
+- Hardware:
-- Development: 'dev.md'
+  - Overview : 'hardware.md'
+  - CESA (HW Crypto) : 'cesa.md'
+  - GPIO : 'gpio.md'
+  - I2C (OLED) : 'i2c.md'
+  - LED : 'led.md'
+  - PWM (Fan) : 'pwm.md'
+  - SPI (NOR Flash) : 'spi.md'
 - Documents: 'docs.md'
 - About: 'about.md'