dbroqua/kobol-wiki
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Update I2C pinout to match OLED pin names

This commit is contained in:
Gauthier Provost 2019-07-16 14:32:31 +08:00
parent f2545e5d44
commit e70ea9f514
2 changed files with 4 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
docs/i2c.md
View File

@ -15,7 +15,7 @@ The I2C interface on Helios4 board is located at header **J9** which exposes the
You will need to use Female to Female Jumper Wire (a.k.a Dupont Cable) to connect your display to Helios4 board.
Connect matching pin on each side (GND to GND, VDD to VDD, SDA to SDA, etc...). Ideally you use cables of different colors to easily check that your wiring is correct.
Connect matching pin on each side (GND to GND, VCC to VCC, SDA to SDA, etc...). Ideally you use cables of different colors to easily check that your wiring is correct.
![oled i2c wiring](/img/i2c/wiring_01.jpeg)
![board i2c wiring](/img/i2c/wiring_02.jpeg)
@ -71,6 +71,9 @@ sudo ./install.sh
Test which display model is the correct one by launching manually **sys-oled** and trying different display model as parameter until the System Status is showing correctly on the display.
!!! info
If you get your OLED display as part of your Helios4 Kit, then you can skip to next [step](#2-configure-display-info) since **sys-oled** is already configure to use the correct model.
Example :
```

BIN
docs/img/hardware/i2c_pinout.png
View File

Binary file not shown.
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 3.5 KiB

After

Width:  |  Height:  |  Size: 5.8 KiB