!!! note
Go to [Kit Assembly](./kit) to find out how to put together your Helios4 NAS
## **What you need before you start.**
**1. microSD Card
**
You need a microSD Card UHS-I with a minimum of 8GB. Ideally Speed Class 3.
We recommend the following models:
\- Samsung Evo Pro+ 32GB
\- SanDisk Extreme Pro 32GB
**2. Micro-USB to USB cable
**
**3. Ethernet cable (cat5/6)
**
## **Step 1** - Download an Helios4 image build
You will need first to download a image build to write on the microSD Card.
Go to [Dowload](/download) and chose one of the latest build.
!!! note
If you are looking for a turn key solution, download the OpenMediaVault build.
## **Step 2** - Writing an image to a microSD Card
You will need to use an image writing tool to install on your microSD Card the image build you have downloaded.
### Under Windows, Mac OS or Linux (via Graphic Interface)
Etcher is a graphical SD card writing tool that works on Mac OS, Linux and Windows, and is the easiest option for most users. Etcher also supports writing images directly from XZ files, without any prerequired decompression. To write your image with Etcher:
- [Download Etcher](http://etcher.io) and install it on your computer.
- Insert the microSD Card inside your SD card reader (microSD to SD adapter might be needed).
- Open Etcher and select from your local storage the Helios4 .img.xz file you wish to write to the microSD Card.
- Select the microSD Card you wish to write your image to.
- Review your selections and click 'Flash!' to begin writing data to the microSD Card.
### Under Linux (via Terminal)
```bash
$ unxz Helios4_Debian_Jessie_4.4.96.img.xz
$ dd bs=4M if=Helios4_Debian_Jessie_4.4.96.img of=/dev/sdX conv=fsync
```
!!! note
/dev/sdX is where the microSD is mapped in your Linux machine, change the 'X' to your corresponding mapped device. If you set /dev/sdX to a wrong device then you might risk erasing a hard drive or different device than the designated microSD.
## **Step 3** - Power-up Helios4
**Before powering-up insure :**
1. You inserted the microSD Card that you prepared in the previous step.
2. You connected your computer to the serial port with the Micro-USB to USB cable.
3. You connected Helios4 to your home network with the Ethernet cable.
4. You plugged-in properly the DC power connector before powering-up the AC adapter.
**Now you can plug-in / power-up the AC adapter.**
!!! warning
Always proceed with caution when manipulating 110/220V appliance.
## **Step 4** - Connect to Helios4 serial console
### Under Windows
1. [Download PuTTY](https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html) and install it on your computer.
2. Select connection type **serial**.
3. Setup serial port settings (Serial line : **COM1** and Speed : **115200**), then press **'Open'**
!!! note
If you computer already has a serial port then COM1 might not be the correct serial line to connect to Helios4. Check this [link](https://tnp.uservoice.com/knowledgebase/articles/172101-determining-the-com-port-of-a-usb-to-serial-adapte) to learn how to determine the right COM port.
### Under Linux (via Terminal)
1. Install picocom (under Debian/Ubuntu)
> $ sudo apt-get install picocom
2. Connect to serial with picocom
> $ sudo picocom -b 115200 /dev/ttyUSB0
!!! note
To exit picocom do **Ctrl-a** then **Ctrl-x**
## **Step 5** - Log in
!!! note
You might need to press **Enter** for the login prompt to come up.
**Default credential for Debian image**
```bash
helios4 login: root
Password: 1234
```
You will be prompted to change the root password and then create a new user account.
**Default credential for OpenMediaVault image**
```bash
helios4 login: root
Password: openmediavault
```
You will be prompted to change the root password.
## **Step 6** - Check/Set IP address
### Check IP address
By default Helios4 will try to obtain an IP address via DHCP. To figure out what is the allocated IP address you will need to type the following command in the console.
```bash
$ ifconfig eth0
```
Here the IP address of Helios4 is **10.10.10.1**.
!!! note
Openmediavault comes with **mDNS** server (Avahi daemon). Therefore if your desktop/laptop runs a mDNS client you can reach the board via the following hostname address : **helios4.local**
### Set IP address
If you wish to manually configure your IP address you can use the **armbian-config** tool.
```bash
$ sudo armbian-config
```
You will have to reboot for the network settings to take effect.
```bash
$ sudo reboot
```
!!! info
You can also refer to the following Debian Wiki [Page](https://wiki.debian.org/NetworkConfiguration#Setting_up_an_Ethernet_Interface) for advanced network settings.
## **What to do next ?**
**If you have installed an OpenMediaVault image, refer to the [OMV page](/omv) for further instructions.**
Otherwise you can now connect by SSH to your Helios4 to carry on with your configuration.
