135 lines
3.7 KiB
Markdown
135 lines
3.7 KiB
Markdown
|
|
## User Accessible GPIOs (J12)
|
|
|
|
Helios4 provides 12 GPIOs on header J12 which can be used for user application. Those GPIOs are provided via an 16-bit IO Expander [PCA9655E](http://www.onsemi.com/PowerSolutions/product.do?id=PCA9655E) connected to I2C bus 0.
|
|
|
|
|
|
|
|
### Pinout Table
|
|
|
|
| Pin | Port | Remarks |
|
|
|------------|----------|---------|
|
|
| 1 | - | 3.3V supply |
|
|
| 2 | IO0_2 | |
|
|
| 3 | IO0_3 | |
|
|
| 4 | IO0_4 | |
|
|
| 5 | IO0_7 | |
|
|
| 6 | IO1_0 | |
|
|
| 7 | IO1_1 | |
|
|
| 8 | IO1_2 | |
|
|
| 9 | IO1_3 | |
|
|
| 10 | IO1_4 | |
|
|
| 11 | IO1_5 | |
|
|
| 12 | IO1_6 | |
|
|
| 13 | IO1_7 | |
|
|
| 14 | - | GND |
|
|
|
|
!!! warning
|
|
Ports **IO0_0**, **IO0_1**, **IO0_5**, and **IO0_6** are reserved for system use.
|
|
|
|
!!! important
|
|
It is not advisable to access the I2C IO Expander directly using I2C utilities.
|
|
|
|
## Accessing GPIOs under Linux
|
|
|
|
If the kernel supports debugfs (*CONFIG_DEBUG_FS=y*), list of GPIOs can be retrieved with the following command
|
|
|
|
```bash
|
|
sudo cat /sys/kernel/debug/gpio
|
|
```
|
|
|
|
Look for the **gpiochip2: GPIOs XXX-YYY** section, whereas **XXX** is first GPIO number and **YYY** is last GPIO number of IO expander.
|
|
|
|
|
|
```
|
|
gpiochip2: GPIOs 496-511, parent: i2c/0-0020, pca9555, can sleep:
|
|
gpio-496 ( |board-rev-0 ) in lo
|
|
gpio-497 ( |board-rev-1 ) in lo
|
|
gpio-498 ( |(null) ) out hi
|
|
gpio-499 ( |(null) ) in hi
|
|
gpio-500 ( |(null) ) in hi
|
|
gpio-501 ( |usb-overcurrent-stat) in hi
|
|
gpio-502 ( |USB-PWR ) out hi
|
|
gpio-503 ( |(null) ) in hi
|
|
gpio-504 ( |(null) ) in hi
|
|
gpio-505 ( |(null) ) in hi
|
|
gpio-506 ( |(null) ) in hi
|
|
gpio-507 ( |(null) ) in hi
|
|
gpio-508 ( |(null) ) in hi
|
|
gpio-509 ( |(null) ) in hi
|
|
gpio-510 ( |(null) ) in hi
|
|
gpio-511 ( |(null) ) in hi
|
|
```
|
|
|
|
Another way to get first GPIO number of the IO expander
|
|
|
|
```
|
|
cat /sys/bus/i2c/devices/0-0020/gpio/gpiochip*/base
|
|
```
|
|
|
|
Therefore the mapping between header J12 Pins and Sysfs GPIO numbers will be as described in the following table
|
|
|
|
### GPIO Table
|
|
|
|
| Pin | Sysfs GPIO number | Remarks |
|
|
|----|-----|---------|
|
|
| 1 | - | 3.3V supply |
|
|
| 2 | 498 | |
|
|
| 3 | 499 | |
|
|
| 4 | 500 | |
|
|
| 5 | 503 | |
|
|
| 6 | 504 | |
|
|
| 7 | 505 | |
|
|
| 8 | 506 | |
|
|
| 9 | 507 | |
|
|
| 10 | 508 | |
|
|
| 11 | 509 | |
|
|
| 12 | 510 | |
|
|
| 13 | 511 | |
|
|
| 14 | - | GND |
|
|
|
|
!!! note
|
|
The mapping table is unlikely to change between Kernel version.
|
|
|
|
|
|
### GPIO Control
|
|
|
|
**1.** Export the GPIO number you want to use
|
|
|
|
```
|
|
echo N | sudo tee -a /sys/class/gpio/export
|
|
```
|
|
|
|
**2.** Set the direction, "out" for Output or "in" for Input
|
|
|
|
```
|
|
echo DIRECTION | sudo tee -a /sys/class/gpio/gpioN/direction
|
|
```
|
|
|
|
**3.** Now you can read or change the GPIO value
|
|
|
|
To read GPIO value
|
|
|
|
```
|
|
cat /sys/class/gpio/gpioN/value
|
|
```
|
|
|
|
To change GPIO value (only if GPIO set as Output)
|
|
|
|
```
|
|
echo VALUE | sudo tee -a /sys/class/gpio/gpioN/value
|
|
```
|
|
|
|
!!! notes
|
|
Pay attention to the path, /sys/class/gpio/gpio**N**/ where **N** is the GPIO number.
|
|
|
|
#### Example
|
|
|
|
Set IO1_7 (pin 13) output as high
|
|
|
|
```
|
|
echo 511 | sudo tee -a /sys/class/gpio/export
|
|
echo "out" | sudo tee -a /sys/class/gpio/gpio511/direction
|
|
echo 1 | sudo tee -a /sys/class/gpio/gpio511/value
|
|
```
|