kobol-wiki/docs/sdcard.md
Gauthier Provost 5dd9a175e0 Update SDIO page
* rename page to SDIO
* fix some typo
* change microSD card pics
* add tested microsd table
2018-12-13 17:50:23 +08:00

17 KiB
Raw Blame History

Helios4 SoC (Armada 388) SDIO controller supports up to UHS-I speed mode.

Following modes are supported:

  • Default Speed (DS)up to 25 MHz, 1.8V/3.3V signaling
  • High Speed (HS)up to 50 MHz, 1.8V/3.3V signaling
  • SDR12SDR up to 25 MHz, 1.8V/3.3V signaling
  • SDR25SDR up to 50 MHz, 1.8V/3.3V signaling
  • SDR50SDR up to 100 MHz, 1.8V signaling
  • DDR50DDR up to 50 MHz, 1.8V/3.3V signaling

However, it is not compatible with all cards even though the SD cards are declared as UHS-I capable. To keep it compatible with most of card, Helios4 device tree only define by default Normal Speed mode.

!!! Warning Enabling High Speed and UHS-I support could lead to unbootable system because of incompatible microSD card.

Device Tree Modification

To enable High Speed mode and UHS-I support, Helios4 device tree need to be modified. The following instructions are executed under Helios4.

Prerequisites

  • Helios4 Linux Kernel Source Code
  • Build Essentials package

Install the dependencies and extract the source into ~/src/linux

sudo apt-get -y install build-essential linux-source-4.14.87-next-mvebu
mkdir -p ~/src/linux
tar Jxf /usr/src/linux-source-4.14.87-mvebu.tar.xz -C ~/src/linux

!!! note You will need to choose the right linux-source package that matches the kernel version you are running. Check kernel version with command uname -a

Patching and Compilation

Download and apply this patch to Linux kernel source code.

cd ~/src/linux

wget https://wiki.kobol.io/files/sdcard/helios4_dtb_sd_uhs_linux_stable.patch
git apply --apply --verbose helios4_dtb_sd_uhs_linux_stable.patch

Compile the device tree into dtb

make armada-388-helios4.dtb
cp arch/arm/boot/dts/armada-388-helios4.dtb armada-388-helios4.dtb.uhs

!!! Info Precompiled dtb for Linux kernel 4.14 can be found here

Copy new dtb to /boot/dtb/, backup the original dtb and create symlink to new dtb

sudo cp armada-388-helios4.dtb.uhs /boot/dtb/
cd /boot/dtb/
sudo cp armada-388-helios4.dtb armada-388-helios4.dtb.ori
sudo ln -sf armada-388-helios4.dtb.uhs armada-388-helios4.dtb

Reboot the system.

Recovery

If the system become unbootable after applying modified dtb, recover the system by connecting to Helios4 serial console and run following commands

setenv fdt_addr 0x2040000
setenv bootargs "console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 ubootdev=mmc scandelay ignore_loglevel"

load mmc 0:1 ${fdt_addr} /boot/dtb/armada-388-helios4.dtb.ori
load mmc 0:1 ${ramdisk_addr_r} /boot/uInitrd
load mmc 0:1 ${kernel_addr_r} /boot/zImage

setenv fdt_high 0xffffffff
setenv initrd_high 0xffffffff

bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr}

After successfully boot to Linux, restore the original dtb and remove the modified one.

sudo mv -f /boot/dtb/armada-388-helios4.dtb.ori /boot/dtb/armada-388-helios4.dtb
sudo rm /boot/dtb/armada-388-helios4.dtb.uhs

Performance Testing

The test methodology is adapted from SD card performance - Research guides & tutorials - Armbian forum with slightly modified parameter to run the test on SD card mounted under /mnt/sdcard.

iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 -f /mnt/sdcard/iozone-test.dat

To automate the test, a test script named run_sdcard_test.sh was created.

Test Procedure

1. Prepare the system to boot from SPI and Rootfs located on USB drive. See SPI (NOR Flash) page.

2. Build and replace Helios4 dtb as instructed in Device Tree Modification.

3. Install iozone and download the test script

sudo apt-get -y install iozone

wget https://wiki.kobol.io/files/sdcard/run_sdcard_test.sh
chmod 755 run_sdcard_test.sh

4. Override kernel loglevel on every boot

sudo sed -i 's/^exit 0/dmesg -n 8\nexit 0/g' /etc/rc.local

5. Make sure armada-388-helios4.dtb points to armada-388-helios4.dtb.uhs

cd /boot/dtb/
sudo ln -sf armada-388-helios4.dtb.uhs armada-388-helios4.dtb

6. Reboot and cancel U-Boot autoboot.

7. Read SD card info and boot to Linux

mmc rescan
mmc info
bootd

8. Observe whether any error/warning on sd card detection in console and check whether sdcard is detected.

dmesg | grep "mmc"
lsblk

9. Run the test script

sudo ./run_sdcard_test.sh

The test script will display the test progress and log result into log file : SD_test_<sdcard_address>_[<sdcard_name>]_<date_in_YYYYMMDD_HHMMSS>.log

Example filename: SD_test_mmc0:aaaa-[SU08G]_20181212_034241.log

If the SD card is not detected, the test script would exit without saving any log file.

10. Change armada-388-helios4.dtb to point back to armada-388-helios4.dtb.ori

cd /boot/dtb/
sudo ln -sf armada-388-helios4.dtb.ori armada-388-helios4.dtb

11. Repeat step 6 until 9 to test in Normal Speed mode.

12. Repeat step 5 until 11 for other card.

13. Remove kernel loglevel override done in step 4.

sudo sed -i '/^dmesg -n 8/d' /etc/rc.local

Tested MicroSD Card

Below a non-exhaustive list of microSD Card models that we tested to check compatibility with UHS-I speed mode. We will keep populating this list with new microSD Card models.

MicroSD Card Model UHS-I Compatibility Result
Kingston Mobile Card microSDHC (16GB) not compatible
Sandisk Ultra microSD UHS-I Card (32GB) yes, but no performance improvement
Sandisk Ultra microSD UHS-I Card (16GB) not compatible
Sandisk Ultra microSD UHS-I Card 48MBps (16GB) not compatible
Sandisk Ultra microSD UHS-I Card 30MBps (8GB) yes, but no performance improvement
Strontium Nitro MicroSD Card (16GB) yes, performance boosted
Toshiba MicroSD Exceria Pro (16GB) not compatible
Transcend microSDHC Premium (8GB) yes, but no performance improvement

Kingston Mobile Card microSDHC (16GB)

Kingston microSDHC 16GB

Specifications

Product Page https://www.kingston.com/en/flash/microsd_cards/sdcb
Manufacture Id 0x00009f
OEM ID 0x5449
Product Name SD16G
HW Revision 0x3
FW Revision 0x0
Serial Number 0x5b3003c7
Manufacture Date 07/2018
Capacity Standard SDHC
SD version* 1.0
Mode* SD Legacy
Bus Speed* 25000000
Bus Width* 4-bit

!!! Notes * Value taken from U-Boot "mmc info".

Test Result : Failed!

mmc0: new SDHC card at address 0001
mmcblk0: mmc0:0001 SD16G 14.6 GiB
 mmcblk0: p1

The card was detected by Linux but when the test runnning, kernel console constantly emits

mmcblk0: error -110 transferring data, sector 2433024, nr 1024, cmd response 0x900, card status 0xb00
mmcblk0: retrying using single block read
mmc0: Timeout waiting for hardware interrupt.
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr:  0x00000000 | Version:  0x00000202
mmc0: sdhci: Blk size:  0x00007200 | Blk cnt:  0x00000030
mmc0: sdhci: Argument:  0x00252400 | Trn mode: 0x00000033
mmc0: sdhci: Present:   0x01e70206 | Host ctl: 0x00000011
mmc0: sdhci: Power:     0x0000000f | Blk gap:  0x00000000
mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x0000fa07
mmc0: sdhci: Timeout:   0x00000003 | Int stat: 0x00000000
mmc0: sdhci: Int enab:  0x02ff008b | Sig enab: 0x02ff008b
mmc0: sdhci: AC12 err:  0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps:      0x25fcc8b2 | Caps_1:   0x00002f77
mmc0: sdhci: Cmd:       0x0000123a | Max curr: 0x00000000
mmc0: sdhci: Resp[0]:   0x00000900 | Resp[1]:  0x47305b30
mmc0: sdhci: Resp[2]:   0x53443136 | Resp[3]:  0x009f5449
mmc0: sdhci: Host ctl2: 0x00000008
mmc0: sdhci: ADMA Err:  0x00000000 | ADMA Ptr: 0x7f0b95d0
mmc0: sdhci: ============================================
mmcblk0: error -110 transferring data, sector 2434048, nr 1024, cmd response 0x900, card status 0xb00
mmc0: Timeout waiting for hardware interrupt.

And the still did not finished the test after 8 hours.


Sandisk Ultra microSD UHS-I Card (32GB)

Sandisk Ultra smartphone 32GB

Specifications

Product Page https://www.sandisk.com/home/memory-cards/microsd-cards/ultra-microsd-for-smartphones
Manufacture Id 0x000003
OEM ID 0x5344
Product Name SL32G
HW Revision 0x8
FW Revision 0x0
Serial Number 0x0c9daa71
Manufacture Date 04/2014
Capacity Standard SDHC
SD version* 3.0
Mode* SD High Speed (50MHz)
Bus Speed* 50000000
Bus Width* 4-bit

!!! Notes * Value taken from U-Boot "mmc info".

Test Result

mmc0: new ultra high speed DDR50 SDHC card at address aaaa
mmcblk0: mmc0:aaaa SL32G 29.7 GiB
 mmcblk0: p1
mmc0: Tuning failed, falling back to fixed sampling clock
mmcblk0: error -84 transferring data, sector 62333824, nr 8, cmd response 0x900, card status 0xb00

Even though there are some errors, the test finished without much improvement.

!Sandisk Ultra smartphone 32GB Test Result


Sandisk Ultra microSD UHS-I Card (16GB)

Sandisk Ultra smartphone 16GB

Specifications

Product Page https://www.sandisk.com/home/memory-cards/microsd-cards/ultra-microsd-for-smartphones
Manufacture Id 0x000003
OEM ID 0x5344
Product Name SL16G
HW Revision 0x8
FW Revision 0x0
Serial Number 0xa5253c77
Manufacture Date 04/2017
Capacity Standard SDHC
SD version* 3.0
Mode* SD High Speed (50MHz)
Bus Speed* 50000000
Bus Width* 4-bit

!!! Notes * Value taken from U-Boot "mmc info".

Test Result : Failed!

mmc0: new ultra high speed DDR50 SDHC card at address aaaa
mmcblk0: mmc0:aaaa SL16G 14.8 GiB
mmcblk0: error -84 sending status command, retrying
mmc0: Tuning failed, falling back to fixed sampling clock
mmcblk0: error -84 sending status command, retrying
mmc0: Tuning failed, falling back to fixed sampling clock
mmcblk0: error -84 sending status command, aborting
mmc0: Tuning failed, falling back to fixed sampling clock
mmcblk0: unable to read partition table
mmc0: card aaaa removed
mmc0: new high speed SDHC card at address aaaa
mmcblk0: mmc0:aaaa SL16G 14.8 GiB
mmcblk0: error -84 sending status command, retrying
mmcblk0: error -84 sending stop command, original cmd response 0x900, card status 0x900
mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0
mmcblk0: error -84 sending stop command, original cmd response 0x900, card status 0x900
mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0

The card was not detected by Linux.


Sandisk Ultra microSD UHS-I Card 48MBps (16GB)

Sandisk Ultra 48MBps

Specifications

Product Page https://www.sandisk.com/home/memory-cards/microsd-cards/ultra-microsd-48mbs
Manufacture Id 0x000003
OEM ID 0x5344
Product Name SL16G
HW Revision 0x8
FW Revision 0x0
Serial Number 0x349f2b91
Manufacture Date 01/2016
Capacity Standard SDHC
SD version* 3.0
Mode* SD High Speed (50MHz)
Bus Speed* 50000000
Bus Width* 4-bit

!!! Notes * Value taken from U-Boot "mmc info".

Test Result : Failed!

mmc0: new ultra high speed DDR50 SDHC card at address aaaa
mmcblk0: mmc0:aaaa SL16G 14.8 GiB
mmc0: Tuning failed, falling back to fixed sampling clock
mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00
 mmcblk0: p1
mmcblk0: error -84 transferring data, sector 10240, nr 8, cmd response 0x900, card status 0xb00
mmcblk0: error -84 transferring data, sector 8784, nr 72, cmd response 0x900, card status 0xb00
mmcblk0: error -84 transferring data, sector 8784, nr 72, cmd response 0x900, card status 0xb00
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 8856, nr 360, cmd response 0x900, card status 0xb00
mmcblk0: error -84 transferring data, sector 8856, nr 360, cmd response 0x900, card status 0xb00

The card was not detected by Linux.


Sandisk Ultra microSD UHS-I Card 30MBps (8GB)

Sandisk Ultra 30 MBps

Specifications

Product Page https://www.sandisk.com/home/memory-cards/microsd-cards/ultra-microsd-for-smartphones
Manufacture Id 0x000003
OEM ID 0x5344
Product Name SU08G
HW Revision 0x8
FW Revision 0x0
Serial Number 0x2369e07f
Manufacture Date 12/2013
Capacity Standard SDHC
SD version* 3.0
Mode* SD High Speed (50MHz)
Bus Speed* 50000000
Bus Width* 4-bit

!!! Notes * Value taken from U-Boot "mmc info".

Test Result

mmc0: new ultra high speed DDR50 SDHC card at address aaaa
mmcblk0: mmc0:aaaa SU08G 7.40 GiB
mmc0: Tuning failed, falling back to fixed sampling clock
mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00
 mmcblk0: p1

Even though there are some errors, the test finished. Many of test cases see performance reduction.

!Sandisk Ultra 30 MBps Test Result


Strontium Nitro MicroSD Card (16GB)

Strontium

Specifications

Product Page http://www.strontium.biz/products/memory-cards/mobile-memory-cards/#seven
Manufacture Id 0x000084
OEM ID 0x5446
Product Name SD
HW Revision 0x0
FW Revision 0x0
Serial Number 0x954b266b
Manufacture Date 09/2016
Capacity Standard SDHC
SD version* 3.0
Mode* SD High Speed (50MHz)
Bus Speed* 50000000
Bus Width* 1-bit

!!! Notes * Value taken from U-Boot "mmc info".

Test Result

mmc0: Tuning failed, falling back to fixed sampling clock
mmc0: new ultra high speed DDR50 SDHC card at address 0001
mmcblk0: mmc0:0001 SD 14.6 GiB
 mmcblk0: p1
mmc0: Tuning failed, falling back to fixed sampling clock
mmc0: Tuning failed, falling back to fixed sampling clock

Even though there are some warnings, the test finished.

!Strontium Nitro Test Result


Toshiba MicroSD Exceria Pro (16GB)

Toshiba Exceria Pro

Specifications

Product Page https://www.toshiba-memory.com/products/toshiba-microsd-cards-exceria-pro-m401/
Manufacture Id 0x000002
OEM ID 0x544d
Product Name UC0C5
HW Revision 0x5
FW Revision 0x0
Serial Number 0xd2a0e6a3
Manufacture Date 11/2016
Capacity Standard SDHC
SD version* 3.0
Mode* SD High Speed (50MHz)
Bus Speed* 50000000
Bus Width* 4-bit

!!! Notes * Value taken from U-Boot "mmc info".

Test Result : Failed!

mmc0: error -84 whilst initialising SD card

The card was not detected by Linux.


Transcend microSDHC Premium (8GB)

Transcend

Specifications

Product Page https://www.transcend-info.com/Products/No-320
Manufacture Id 0x000074
OEM ID 0x4a45
Product Name USD
HW Revision 0x1
FW Revision 0x0
Serial Number 0x4568e585
Manufacture Date 06/2014
Capacity Standard SDHC
SD version* 3.0
Mode* SD High Speed (50MHz)
Bus Speed* 50000000
Bus Width* 1-bit

Test Result

mmc0: new high speed SDHC card at address b368
mmcblk0: mmc0:b368 USD   7.45 GiB
 mmcblk0: p1

!Transcend Premium Test Result


*Value taken from U-Boot "mmc info"