2.4 KiB
Helios64 automatic power on circuitry when main power applied to the system so user does not need to press power button. This is useful in case of loss of main power longer than UPS back up time. The system will automatically power on when main power return.
U-Boot will enable Auto Power On and a systemd-shutdown hook script to disable the Auto Power On during graceful shutdown.
By default the system need the user to press power button to power up. This behaviour can be changed by manipulating a set of GPIOs. The circuitry uses D Flip Flop and rely on RTC battery or UPS battery to keep the state.
| State | D | Clock |
|---|---|---|
| Enable | 1 | Rising edge |
| Disable | 0 | Rising edge |
Auto Power On Control under Linux
AUTO_ON_EN_D pin and AUTO_ON_EN_CLK pin is assigned to gpio 153 and gpio 154 respectively. After exporting and configure the GPIOs as output (refer to GPIO Control), we will do bit-banging to configure the D Flip Flop.
To enable the Auto Power On
echo 1 > /sys/class/gpio/gpio153/value
echo 0 > /sys/class/gpio/gpio154/value
sleep 0.1
echo 1 > /sys/class/gpio/gpio154/value
sleep 0.1
echo 0 > /sys/class/gpio/gpio154/value
To disable the Auto Power On
echo 0 > /sys/class/gpio/gpio153/value
echo 0 > /sys/class/gpio/gpio154/value
sleep 0.1
echo 1 > /sys/class/gpio/gpio154/value
sleep 0.1
echo 0 > /sys/class/gpio/gpio154/value
Systemd-shutdown Script
We put a script to disable Auto Power On during shutdown, located on
/lib/systemd/system-shutdown/disable_auto_poweron.
The script content:
#!/bin/bash
# Export GPIO
# AUTO_ON_D
echo 153 > /sys/class/gpio/export
# AUTO_EN_CLK
echo 154 > /sys/class/gpio/export
echo out > /sys/class/gpio/gpio153/direction
echo out > /sys/class/gpio/gpio154/direction
# Toggling the D Flip-Flop
echo 0 > /sys/class/gpio/gpio153/value
echo 0 > /sys/class/gpio/gpio154/value
sleep 0.1
echo 1 > /sys/class/gpio/gpio154/value
sleep 0.1
echo 0 > /sys/class/gpio/gpio154/value
!!! Info Current implementation does not check whether there is loss of power event.