445 lines
15 KiB
Markdown
445 lines
15 KiB
Markdown
|
|
|
|
## USB Controller Types
|
|
|
|
There are 3 types of USB controller available on RK3399 SoC. Each type has 2 controllers, so in total there are 6 USB controllers. Below a description of each controller type.
|
|
|
|
### Generic OHCI USB 1.1 Controller
|
|
This controller is Host only controller that is compatible with USB 1.1.
|
|
|
|
Supported speeds:
|
|
|
|
- Full Speed (12 Mbps)
|
|
- Low Speed (1.5 Mbps)
|
|
|
|
### Generic EHCI USB 2.0 Controller
|
|
This controller is Host only controller that is compatible with USB 2.0. The controller shared port with
|
|
*Generic OHCI USB 1.1 Controller* therefore any USB 1.1 device connected to the port, will be automatically routed to *Generic OHCI USB 1.1 Controller*.
|
|
|
|
Supported speed:
|
|
|
|
- High Speed (480 Mbps)
|
|
|
|
### Synopsys DesignWare USB 3.0 Dual-Role Device Controller
|
|
This controller support On-The-Go / Dual Role which means it can be configured as Host or as Device.
|
|
|
|
Supported speeds:
|
|
|
|
- Super Speed (5 Gbps)
|
|
- High Speed (480 Mbps)
|
|
- Full Speed (12 Mbps)
|
|
- Low Speed (1.5 Mbps)
|
|
|
|
This controller is connected to RK3399 Type-C PHY.
|
|
|
|
## USB on Helios64
|
|
|
|
|
|
|
|
* The first USB 3.0 Dual-Role Device Controller is connected to USB Type-C connector (J15) and configured as OTG with help of [FUSB302](https://www.onsemi.com/products/interfaces/usb-type-c/fusb302).
|
|
* The second USB 3.0 Dual-Role Device Controller is connected to USB Hub 3.1 Gen 1 and configured as Host only.
|
|
* One of EHCI Controller (and OHCI Controller) is connected to M.2 socket.
|
|
|
|
### Power Budget
|
|
|
|
Each external USB port is protected by a Power Distribution switch with following current limit.
|
|
|
|
| Port | Voltage | Maximum Current | Remarks |
|
|
|------------|-------|------------------|---------|
|
|
| USB 3.0 Upper Back Panel | 5V | 900 mA | |
|
|
| USB 3.0 Lower Back Panel | 5V | 900 mA | |
|
|
| USB 3.0 Front Panel | 5V | 900 mA | |
|
|
| Type-C | 5V | 1200 mA | PDO source only |
|
|
|
|
|
|
## Type-C Functionality on Helios64
|
|
|
|
To minimize number of interfaces and cables, Helios64 combined 4 functions into the USB Type-C interface :
|
|
|
|
* Serial Console
|
|
* Display Port
|
|
* Host Mode
|
|
* Device Mode (aka DAS mode)
|
|
|
|
|
|
|
|
Helios64 uses an High Speed multiplexer on USB 2.0 signal. By default the USB 2.0 signal is routed to USB Serial Console.
|
|
The multiplexer can be override using [jumper P13](/helios64/jumper/#usb-consolerecovery-mode-p13) or by software via GPIO.
|
|
|
|
### Serial Console
|
|
|
|
Serial Console (UART2 Debug) of RK3399 SoC is connected to FT232 USB Serial converter and the USB 2.0 signal of the FT232 is connected to USB 2.0 signals of USB Type-C Port.
|
|
|
|
In case you are using the USB-C for one of the others functionalities but you still need to access SoC serial console for debug purpose, UART2 Debug is also exposed on P14 header.
|
|
|
|
|
|
|
|
### Display Port
|
|
|
|
Using USB Type-C to DisplayPort cable, Helios64 can be connected to monitor to display Linux Desktop or others GUI applications.
|
|
|
|
|
|
|
|
Using USB Type-C to HDMI cable/dongle, Helios64 can be connected to a TV and used as a media center.
|
|
|
|
|
|
|
|
*USB Type-C to HDMI dongle*
|
|
|
|
|
|
|
|
*USB Type-C to HDMI cable*
|
|
|
|
!!! note
|
|
- DisplayPort Alternate Mode is NOT supported on U-Boot.
|
|
- USB Type-C to HDMI cable might not work if it used DisplayPort dual mode (DP++).
|
|
|
|
### Host Mode
|
|
|
|
Using OTG cable (Type-C to Type A female) such as,
|
|
|
|
|
|
|
|
Helios64 can act as USB host and can be connected to various USB devices.
|
|
|
|
### Device Mode
|
|
|
|
Using Type-C to Type A male cable such as,
|
|
|
|
|
|
|
|
Helios64 can be used as Direct Attached Storage (DAS) with the required software configuration. It can also be used as "USB eMMC reader/writer" during system recovery mode.
|
|
|
|
|
|
## USB under U-Boot
|
|
|
|
### USB Host Port
|
|
|
|
USB Host support in U-Boot is quite minimal, it only support USB storage.
|
|
|
|
### USB OTG Port (USB Type-C)
|
|
|
|
USB Type C port is configured as USB device mode as USB Mass Storage connected to eMMC.
|
|
This function can be activated by pressing [Recovery Button](/helios64/button/#recovery-button).
|
|
This is to serve as a way to (re)install OS to eMMC.
|
|
|
|
## USB under Linux
|
|
|
|
!!! Info
|
|
Currently only applicable under Linux Kernel 4.4.
|
|
Mainline kernel support is still under development.
|
|
|
|
### Helios64 as Direct Attached Storage (DAS) device
|
|
|
|
Helios64 can be used as Direct Attached Storage (DAS) device with help of Linux USB Gadget kernel module.
|
|
|
|
The kernel moodule only export the underlying block device NOT the filesystem layer. Therefore if the block device is formatted with filesystem unique to Linux,
|
|
the exported disk may not readable by computer that has Helios64 connected to.
|
|
|
|
For example, the block device is formatted with EXT4 filesystem and Helios64 connected to Windows PC as DAS,
|
|
the Windows PC will not be able to read the disk content unless 3rd party software/driver installed.
|
|
|
|
|
|
!!! warning
|
|
Do NOT access Helios64 simultanouesly as DAS and NAS, as the filesystem is not managed by system and can lead to data corruption.
|
|
|
|
#### Individual Disk Exported as Separate Disk
|
|
|
|
To export all SATA disks that has been identified as /dev/sda ... /dev/sde, run the following command on Helios64.
|
|
|
|
```
|
|
sudo modprobe g_mass_storage file=/dev/sda,/dev/sdb,/dev/sdc,/dev/sdd,/dev/sde iSerialNumber=1234567890 iManufacturer="Kobol Innovations" iProduct=Helios64
|
|
```
|
|
|
|
The following screenshot, Helios64 connected with 5x 120GB SATA drive.
|
|
|
|
***Helios64 connected to PC running Windows***
|
|
|
|
USB device visualization using USB Device Tree Viewer
|
|
|
|
|
|
Helios64 in Device Manager
|
|
|
|
|
|
Disks detected under Disk Management
|
|
|
|
|
|
***Helios64 connected to PC running Linux***
|
|
|
|
USB device visualization using USBview
|
|
|
|
|
|
USB tree using lsusb
|
|
|
|
|
|
```
|
|
$ sudo lsusb -s 2:6 -v
|
|
|
|
Bus 002 Device 006: ID 0525:a4a5 Netchip Technology, Inc. Pocketbook Pro 903
|
|
Device Descriptor:
|
|
bLength 18
|
|
bDescriptorType 1
|
|
bcdUSB 3.00
|
|
bDeviceClass 0 (Defined at Interface level)
|
|
bDeviceSubClass 0
|
|
bDeviceProtocol 0
|
|
bMaxPacketSize0 9
|
|
idVendor 0x0525 Netchip Technology, Inc.
|
|
idProduct 0xa4a5 Pocketbook Pro 903
|
|
bcdDevice 4.04
|
|
iManufacturer 3 Kobol Innovations
|
|
iProduct 4 Helios64
|
|
iSerial 5 1234567890
|
|
bNumConfigurations 1
|
|
OTG Descriptor:
|
|
bLength 3
|
|
bDescriptorType 9
|
|
bmAttributes 0x03
|
|
SRP (Session Request Protocol)
|
|
HNP (Host Negotiation Protocol)
|
|
Configuration Descriptor:
|
|
bLength 9
|
|
bDescriptorType 2
|
|
wTotalLength 47
|
|
bNumInterfaces 1
|
|
bConfigurationValue 1
|
|
iConfiguration 0
|
|
bmAttributes 0xe0
|
|
Self Powered
|
|
Remote Wakeup
|
|
MaxPower 126mA
|
|
Interface Descriptor:
|
|
bLength 9
|
|
bDescriptorType 4
|
|
bInterfaceNumber 0
|
|
bAlternateSetting 0
|
|
bNumEndpoints 2
|
|
bInterfaceClass 8 Mass Storage
|
|
bInterfaceSubClass 6 SCSI
|
|
bInterfaceProtocol 80 Bulk-Only
|
|
iInterface 1 Mass Storage
|
|
Endpoint Descriptor:
|
|
bLength 7
|
|
bDescriptorType 5
|
|
bEndpointAddress 0x81 EP 1 IN
|
|
bmAttributes 2
|
|
Transfer Type Bulk
|
|
Synch Type None
|
|
Usage Type Data
|
|
wMaxPacketSize 0x0400 1x 1024 bytes
|
|
bInterval 0
|
|
bMaxBurst 15
|
|
Endpoint Descriptor:
|
|
bLength 7
|
|
bDescriptorType 5
|
|
bEndpointAddress 0x01 EP 1 OUT
|
|
bmAttributes 2
|
|
Transfer Type Bulk
|
|
Synch Type None
|
|
Usage Type Data
|
|
wMaxPacketSize 0x0400 1x 1024 bytes
|
|
bInterval 0
|
|
bMaxBurst 15
|
|
Binary Object Store Descriptor:
|
|
bLength 5
|
|
bDescriptorType 15
|
|
wTotalLength 22
|
|
bNumDeviceCaps 2
|
|
USB 2.0 Extension Device Capability:
|
|
bLength 7
|
|
bDescriptorType 16
|
|
bDevCapabilityType 2
|
|
bmAttributes 0x00000006
|
|
Link Power Management (LPM) Supported
|
|
SuperSpeed USB Device Capability:
|
|
bLength 10
|
|
bDescriptorType 16
|
|
bDevCapabilityType 3
|
|
bmAttributes 0x00
|
|
wSpeedsSupported 0x000f
|
|
Device can operate at Low Speed (1Mbps)
|
|
Device can operate at Full Speed (12Mbps)
|
|
Device can operate at High Speed (480Mbps)
|
|
Device can operate at SuperSpeed (5Gbps)
|
|
bFunctionalitySupport 1
|
|
Lowest fully-functional device speed is Full Speed (12Mbps)
|
|
bU1DevExitLat 1 micro seconds
|
|
bU2DevExitLat 500 micro seconds
|
|
Device Status: 0x0000
|
|
(Bus Powered)
|
|
|
|
```
|
|
|
|
xfce file manager (thunar)
|
|
|
|
|
|
lsblk output:
|
|
```
|
|
$ lsblk
|
|
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
|
|
sdc 8:32 0 111,8G 0 disk
|
|
└─sdc1 8:33 0 111,8G 0 part
|
|
sdd 8:48 0 111,8G 0 disk
|
|
└─sdd1 8:49 0 111,8G 0 part
|
|
sde 8:64 0 111,8G 0 disk
|
|
└─sde1 8:65 0 111,8G 0 part
|
|
sdf 8:80 0 111,8G 0 disk
|
|
└─sdf1 8:81 0 111,8G 0 part
|
|
sdg 8:96 0 111,8G 0 disk
|
|
└─sdg1 8:97 0 111,8G 0 part
|
|
|
|
$ lsblk -S
|
|
NAME HCTL TYPE VENDOR MODEL REV TRAN
|
|
sda 0:0:0:0 disk ATA WDC WDS240G2G0B 0000 sata
|
|
sdb 1:0:0:0 disk ATA TOSHIBA MQ04 0J sata
|
|
sdc 2:0:0:0 disk Linux File-Stor Gadget 0404 usb
|
|
sdd 2:0:0:1 disk Linux File-Stor Gadget 0404 usb
|
|
sde 2:0:0:2 disk Linux File-Stor Gadget 0404 usb
|
|
sdf 2:0:0:3 disk Linux File-Stor Gadget 0404 usb
|
|
sdg 2:0:0:4 disk Linux File-Stor Gadget 0404 usb
|
|
```
|
|
|
|
#### RAID device exported as One Disk
|
|
|
|
Assuming the RAID already created and identified as /dev/md/md-raid6, run the following command on Helios64 to export the RAID block device as USB Mass Storage
|
|
|
|
```
|
|
sudo modprobe g_mass_storage file=/dev/md/md-raid6 iManufacturer="Kobol Innovations" iProduct="Helios64" iSerialNumber="1234567890"
|
|
```
|
|
|
|
The following screenshot, Helios64 connected with 5x 120GB SATA drive and configured as RAID 6 so total space of the block device is ~360GB (3x 120GB). The block device then formatted with NTFS.
|
|
|
|
***Helios64 connected to PC running Windows***
|
|
|
|
USB device visualization using USB Device Tree Viewer
|
|
|
|
|
|
Helios64 in Device Manager
|
|
|
|
|
|
Disks detected under Disk Management
|
|
|
|
|
|
!!! note
|
|
Since the block device is formatted with NTFS, Windows can recognize it and assign drive letter E:
|
|
|
|
***Helios64 connected to PC running Linux***
|
|
|
|
USB device visualization using USBview
|
|
|
|
|
|
USB tree using lsusb
|
|
|
|
|
|
```
|
|
Bus 002 Device 006: ID 0525:a4a5 Netchip Technology, Inc. Pocketbook Pro 903
|
|
Device Descriptor:
|
|
bLength 18
|
|
bDescriptorType 1
|
|
bcdUSB 3.00
|
|
bDeviceClass 0 (Defined at Interface level)
|
|
bDeviceSubClass 0
|
|
bDeviceProtocol 0
|
|
bMaxPacketSize0 9
|
|
idVendor 0x0525 Netchip Technology, Inc.
|
|
idProduct 0xa4a5 Pocketbook Pro 903
|
|
bcdDevice 4.04
|
|
iManufacturer 3 Kobol Innovations
|
|
iProduct 4 Helios64
|
|
iSerial 5 1234567890
|
|
bNumConfigurations 1
|
|
OTG Descriptor:
|
|
bLength 3
|
|
bDescriptorType 9
|
|
bmAttributes 0x03
|
|
SRP (Session Request Protocol)
|
|
HNP (Host Negotiation Protocol)
|
|
Configuration Descriptor:
|
|
bLength 9
|
|
bDescriptorType 2
|
|
wTotalLength 47
|
|
bNumInterfaces 1
|
|
bConfigurationValue 1
|
|
iConfiguration 0
|
|
bmAttributes 0xe0
|
|
Self Powered
|
|
Remote Wakeup
|
|
MaxPower 126mA
|
|
Interface Descriptor:
|
|
bLength 9
|
|
bDescriptorType 4
|
|
bInterfaceNumber 0
|
|
bAlternateSetting 0
|
|
bNumEndpoints 2
|
|
bInterfaceClass 8 Mass Storage
|
|
bInterfaceSubClass 6 SCSI
|
|
bInterfaceProtocol 80 Bulk-Only
|
|
iInterface 1 Mass Storage
|
|
Endpoint Descriptor:
|
|
bLength 7
|
|
bDescriptorType 5
|
|
bEndpointAddress 0x81 EP 1 IN
|
|
bmAttributes 2
|
|
Transfer Type Bulk
|
|
Synch Type None
|
|
Usage Type Data
|
|
wMaxPacketSize 0x0400 1x 1024 bytes
|
|
bInterval 0
|
|
bMaxBurst 15
|
|
Endpoint Descriptor:
|
|
bLength 7
|
|
bDescriptorType 5
|
|
bEndpointAddress 0x01 EP 1 OUT
|
|
bmAttributes 2
|
|
Transfer Type Bulk
|
|
Synch Type None
|
|
Usage Type Data
|
|
wMaxPacketSize 0x0400 1x 1024 bytes
|
|
bInterval 0
|
|
bMaxBurst 15
|
|
Binary Object Store Descriptor:
|
|
bLength 5
|
|
bDescriptorType 15
|
|
wTotalLength 22
|
|
bNumDeviceCaps 2
|
|
USB 2.0 Extension Device Capability:
|
|
bLength 7
|
|
bDescriptorType 16
|
|
bDevCapabilityType 2
|
|
bmAttributes 0x00000006
|
|
Link Power Management (LPM) Supported
|
|
SuperSpeed USB Device Capability:
|
|
bLength 10
|
|
bDescriptorType 16
|
|
bDevCapabilityType 3
|
|
bmAttributes 0x00
|
|
wSpeedsSupported 0x000f
|
|
Device can operate at Low Speed (1Mbps)
|
|
Device can operate at Full Speed (12Mbps)
|
|
Device can operate at High Speed (480Mbps)
|
|
Device can operate at SuperSpeed (5Gbps)
|
|
bFunctionalitySupport 1
|
|
Lowest fully-functional device speed is Full Speed (12Mbps)
|
|
bU1DevExitLat 1 micro seconds
|
|
bU2DevExitLat 500 micro seconds
|
|
Device Status: 0x0000
|
|
(Bus Powered)
|
|
```
|
|
|
|
xfce file manager (thunar)
|
|
|
|
|
|
lsblk output
|
|
```
|
|
$ lsblk
|
|
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
|
|
sdc 8:32 0 335,2G 0 disk
|
|
└─sdc1 8:33 0 335,2G 0 part
|
|
|
|
$ lsblk -S
|
|
NAME HCTL TYPE VENDOR MODEL REV TRAN
|
|
sda 0:0:0:0 disk ATA WDC WDS240G2G0B 0000 sata
|
|
sdb 1:0:0:0 disk ATA TOSHIBA MQ04 0J sata
|
|
sdc 2:0:0:0 disk Linux File-Stor Gadget 0404 usb
|
|
```
|
|
|