114 lines
2.6 KiB
Markdown
114 lines
2.6 KiB
Markdown
# DK60TP
|
|
Mechanical keyboard with backlit, rgb underglow and Trackpoint support.
|
|
|
|
:warning: Still in development :warning:
|
|
|
|
## Features
|
|
- Poker case compatible (if you don't use Trackpoint)
|
|
- IBM Trackpoint
|
|
- Many layouts
|
|
- Backlit
|
|
- RGB underglow
|
|
- Open Hardware
|
|
|
|
## Supported layouts
|
|
|
|
|
|
|
|
## PCB render
|
|
|
|
|
|
|
|
|
|
|
|
## Features
|
|
|
|
DK60TP allows some customisations like RGB underglow, caps lock led or mouse emulation by using trackpoint.
|
|
|
|
For all pinout above, `pin 1` is represented by the square hole.
|
|
|
|
### Trackpoint
|
|
|
|
To use trackpoint you need to connect the `MOUSE PCB` with the `MAIN PCB`. Trackpoint need to be connected to the `MOUSE PCB`.
|
|
|
|
#### Pinout
|
|
|
|
1. Vcc
|
|
2. GND
|
|
3. D2 (data)
|
|
4. reset
|
|
5. D5 (clock)
|
|
|
|
### Capslock led
|
|
|
|
Capslock led can be tuned to :
|
|
* enable internal led
|
|
* disabled it
|
|
* use external led
|
|
|
|
To do this you need to play with the 3 pins connector placed near the reset button.
|
|
|
|
#### Pinout
|
|
|
|
* 1: +Vled (square pin)
|
|
* 2: Integrated led
|
|
* 3: GND
|
|
|
|
#### Example
|
|
|
|
##### Integrated led
|
|
Place a jumper between pin 1 and 2.
|
|
|
|
##### External led
|
|
Connect your led between pin 1 and 3.
|
|
|
|
##### Disable led
|
|
Remove the jumper or place it between pin 2 and 3.
|
|
|
|
### RGB underglow
|
|
|
|
To add more leds (use WS2812B with capacitor) simply use `RGB` connector on the mainboard.
|
|
|
|
:warning: Do not connect `RGB` connector if you use the second PCB (those with mouse buttons).
|
|
|
|
#### Pinout
|
|
|
|
* 1: Vcc (square pin)
|
|
* 2: GND
|
|
* 3: Din
|
|
|
|
## Firmware
|
|
|
|
DK60TP still in development and for now does not have associate firmware, but it will be supported by QMK firmware.
|
|
|
|
## Used softwares
|
|
I've only used Open Source software to make all parts of this project.
|
|
|
|
List of used softwares:
|
|
* OS: Debian
|
|
* Kicad
|
|
* QCad
|
|
* Freecad
|
|
* ...
|
|
|
|
## Third party
|
|
Libraries and footprints are provided by Hasu, /u/techieee, mohitg11 and me.
|
|
|
|
## External links
|
|
|
|
* [PCB guide](https://github.com/ruiqimao/keyboard-pcb-guide)
|
|
* [Hasu's lib](https://github.com/tmk/kicad_lib_tmk)
|
|
* [Hasu's footprint](https://github.com/tmk/keyboard_parts.pretty)
|
|
* [/u/techieee's footprint](https://github.com/egladman/keebs.pretty)
|
|
* [mohitg11's footprints and libraries](https://github.com/mohitg11/TS65AVR)
|
|
* [Trackpoing pinout on alonswartz github](https://github.com/alonswartz/trackpoint)
|
|
* [Plate generator](http://builder.swillkb.com/)
|
|
* [QMK Firmware](https://github.com/qmk/qmk_firmware)
|
|
|
|
## Kicad tips
|
|
|
|
* Usergrid (for MX placement): 0.09375 inches
|
|
* Usergrid (for Led placement): 0.1968504 inches
|
|
* Gap between Grid origin and edge cut:
|
|
- X: 0.53
|
|
- Y: 0.50 mm
|