dbroqua/kobol-wiki
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
kobol-wiki/docs/kit.md
Gauthier Provost 0a0a61a4b1 Update Install page 
Add lightgallery extension
Add OMV guideline (WIP)
Remove 'edition in progress' were page done
2017-12-19 19:05:07 +08:00

221 lines
6.0 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

## Helios4 Full Kit content
* Helios4 Board
* Acrylic casing + screw kit
* 2× 70mm PWM ball bearing FAN
* 4× SATA Data Cable
* 2× Molex to dual SATA Power Cable
* AC/DC Adapter (Input:100-240VAC 50/60Hz, Output: DC 12V/8A) + AC Cable
![Kit Assembly](/img/kit/assembly_pic1.jpg)
## What you need
* Phillips #2 Screwdriver
* Scissors
* At least 2x HDD 3.5"
* Some patience...
![Kit Assembly](/img/kit/assembly_pic2.jpg)
## Assembly quick overview
<iframe width="420" height="315"
src="https://www.youtube.com/embed/og2ssRhCrnI">
</iframe>
## **Step 1** - Preparing acrylic plates
![Kit Assembly](/img/kit/assembly_pic3.jpg)
> **Each acrylics plate is recovered with a protective layer on both sides. Peel the protective layers slowly and insure no left-over sticks to the plate.**
![Kit Assembly](/img/kit/assembly_pic4.jpg)
> **Because of the die-cut intricacy of the front panel, the laser cut process might have left the scrap pieces in place. You will have to use a a tool (e.g a pen or a flat screwdriver) to push out the scrap pieces.**
!!! important
This task requires the most patience. Don't rush it or you risk to damage it.
![Kit Assembly](/img/kit/assembly_pic5.jpg)
![Kit Assembly](/img/kit/assembly_pic6.jpg)
> **Congratulation you have completed the most annoying part.**
![Kit Assembly](/img/kit/assembly_pic7.jpg)
## **Step 2** - HDD cage assembly
> **Get the HDD screws from the screw kit.**
![Kit Assembly](/img/kit/assembly_pic8.jpg)
![Kit Assembly](/img/kit/assembly_pic9.jpg)
> **Position your HDD exactly as shown below.**
![Kit Assembly](/img/kit/assembly_pic10.jpg)
> **Position one of the acrylic side plate on top of your HDDs. Align the holes.**
!!! important
Pay attention to the orientation of the acrylic side plate. You don't want to realize too late a mistake and restart the assembly from the beginning.
![Kit Assembly](/img/kit/assembly_pic11.jpg)
> **Screw the side plate to the HDDs. Don't tighten too hard.**
![Kit Assembly](/img/kit/assembly_pic12.jpg)
![Kit Assembly](/img/kit/assembly_pic13.jpg)
> **Flip side the assembly.**
![Kit Assembly](/img/kit/assembly_pic14.jpg)
![Kit Assembly](/img/kit/assembly_pic15.jpg)
> **Position the order acrylic side plate on top of your HDDs. Align the holes.**
!!! important
Pay attention to the orientation of the acrylic side plate. You don't want to realize too late a mistake and restart the assembly from the beginning.
![Kit Assembly](/img/kit/assembly_pic16.jpg)
> **Screw the side plate to the HDDs. Don't tighten too hard.**
![Kit Assembly](/img/kit/assembly_pic17.jpg)
> **Position the HDD cage stand-up and tighten all the screws.**
!!! note
The cage should sit perfectly level. If not then loose the HDDs screws a bit till it sit flat and re-tighten the screws.
![Kit Assembly](/img/kit/assembly_pic18.jpg)
## **Step 3** - Fan plate assembly
> **Prepare the following items.**
![Kit Assembly](/img/kit/assembly_pic19.jpg)
> **Position the fans exactly as shown below.**
![Kit Assembly](/img/kit/assembly_pic20.jpg)
> **Position the acrylic fan plate on top of the fans. Align the holes.**
!!! important
Pay attention to the orientation of the fan plate. You don't want to realize too late a mistake and restart the assembly from the beginning.
![Kit Assembly](/img/kit/assembly_pic21.jpg)
> **Screw the fan plate to the fans.<br>Tighten the cables to the fan plate with the provided cable zips.**
![Kit Assembly](/img/kit/assembly_pic22.jpg)
> **Cut the loose parts of cable zips.**
![Kit Assembly](/img/kit/assembly_pic23.jpg)
## **Step 4** - Board plate assembly
> **Prepare the following items.**
![Kit Assembly](/img/kit/assembly_pic24.jpg)
![Kit Assembly](/img/kit/assembly_pic25.jpg)
![Kit Assembly](/img/kit/assembly_pic26.jpg)
> **Install the standoffs on the board plate using the 5mm long screws.**
![Kit Assembly](/img/kit/assembly_pic27.jpg)
![Kit Assembly](/img/kit/assembly_pic28.jpg)
> **Position Helios4 board on the plate. Align the holes.**
![Kit Assembly](/img/kit/assembly_pic29.jpg)
> **Screw Helios4 board with the 4mm long screws.**
![Kit Assembly](/img/kit/assembly_pic30.jpg)
> **Configure the boot mode dipswitch as shown in the picture. (More info [here](/hardware/#boot-modes))**
![Kit Assembly](/img/kit/assembly_pic31.jpg)
> **Configure the led mode dipswitch as show in the picture. (More info [here](/hardware/#led-indicators))**
![Kit Assembly](/img/kit/assembly_pic32.jpg)
## **Step 5** - Board cabling
> **Prepare the following items.**
![Kit Assembly](/img/kit/assembly_pic33.jpg)
> **Connect the SATA cables as shown below.**
![Kit Assembly](/img/kit/assembly_pic34.jpg)
> **Connect the fan cables as shown below.**
![Kit Assembly](/img/kit/assembly_pic35.jpg)
![Kit Assembly](/img/kit/assembly_pic35b.jpg)
## **Step 6** - Casing assembly 1/2
> **Prepare and position the items as shown below.**
![Kit Assembly](/img/kit/assembly_pic36.jpg)
> **Slot in the board plate into the HDD cage.**
![Kit Assembly](/img/kit/assembly_pic37.jpg)
!!! note
You will have to pull-up the side plate in order to slot in the board plate.
![Kit Assembly](/img/kit/assembly_anim1.gif)
![Kit Assembly](/img/kit/assembly_pic38.jpg)
> **Position the assembly stand-up.**
![Kit Assembly](/img/kit/assembly_pic39.jpg)
> **Slide in the fan plate.**
![Kit Assembly](/img/kit/assembly_anim2.gif)
## **Step 7** - HDDs cabling
![Kit Assembly](/img/kit/assembly_pic40.jpg)
> **Insert the SATA cables as shown below.**
![Kit Assembly](/img/kit/assembly_pic41.jpg)
![Kit Assembly](/img/kit/assembly_pic42.jpg)
## **Step 8** - Casing assembly 2/2
> **Prepare the following items.**
![Kit Assembly](/img/kit/assembly_pic43.jpg)
!!! note
You will have to push the HDD cables inside in order the slide in the front panel.
> **Slide in front plate.**
![Kit Assembly](/img/kit/assembly_pic44.jpg)
> **Slide in top plate.**
![Kit Assembly](/img/kit/assembly_pic45.jpg)
## What to do next ?
AWESOME !!! You have completed Helios4 Kit Assembly.
**Now you can jump to the [install section](/install).**
![Kit Assembly](/img/kit/assembly_pic46.jpg)
Reference in New Issue View Git Blame Copy Permalink