303 lines
9.3 KiB
Markdown
303 lines
9.3 KiB
Markdown
|
|
|
|
## USB on RK3399
|
|
There are two types of USB controller available on RK3399. Each type has two controller so total USB controllers is 4.
|
|
|
|
### Generic EHCI USB 2.0 Controller
|
|
There are two controller of this type. This controller is Host only controller that is compatible with USB 2.0 and backward compatible with USB 1.1.
|
|
Supported speed:
|
|
|
|
- High Speed (480 Mbps)
|
|
|
|
- Full Speed (12 Mbps)
|
|
|
|
- Low Speed (1.5 Mbps)
|
|
|
|
|
|
### Synopsys DesignWare USB 3.0 Dual-Role Device Controller
|
|
There are two controller of this type. This controller support On-The-Go /Dual Role which mean it can be configured as Host and also Device.
|
|
Supported speed:
|
|
|
|
- Super Speed (5 Gbps)
|
|
|
|
- High Speed (480 Mbps)
|
|
|
|
- Full Speed (12 Mbps)
|
|
|
|
- Low Speed (1.5 Mbps)
|
|
|
|
The controller is connected to Rockchip Type-C PHY.
|
|
|
|
## USB on Helios64
|
|
|
|
|
|
|
|
One of EHCI Controller is connected to M.2 socket.
|
|
|
|
The first Synopsys DesignWare USB 3.0 Dual-Role Device Controller is connected to USB Type-C connector and configured as OTG with help of FUSB302.
|
|
|
|
The second Synopsys DesignWare USB 3.0 Dual-Role Device Controller is connected to USB Hub 3.1 Gen 1 and configured as Host only.
|
|
|
|
### Power Budget
|
|
|
|
Each of external USB port is protected by Power Distribution switch with following current limit.
|
|
|
|
| Port | Voltage | Maximum Current | Remarks |
|
|
|------------|-------|------------------|---------|
|
|
| USB 3.0 Upper Back Panel | 5V | 900 mA | |
|
|
| USB 3.0 Lower Back Panel | 5V | 900 mA | |
|
|
| USB 3.0 Front Panel | 5V | 900 mA | |
|
|
| Type-C | 5V | 1200 mA | PDO source only |
|
|
|
|
|
|
## USB Type-C Functionality on Helios64
|
|
|
|
To simplify the cabling, Helios64 is designed to have
|
|
|
|
|
|
|
|
### Serial Console
|
|
|
|
Serial Console of Helios64 is connected to FT232 USB Serial converter and the USB 2.0 signal of the FT232 is connected to USB 2.0 signals of USB Type-C Port.
|
|
Refer to ***JUMPER PAGE***
|
|
|
|
|
|
### DisplayPort Alternate Mode
|
|
|
|
Using USB Type-C to DisplayPort cable or USB Type-C to HDMI dongle, Helios64 can be connected to monitor to display Linux Desktop or other GUI application.
|
|
|
|
*** Put USB Type-C to DisplayPort cable photo here ***
|
|
|
|
*** Put USB Type-C to HDMI dongle photo here ***
|
|
|
|
!!! note
|
|
DisplayPort Alternate Mode is NOT supported on U-Boot.
|
|
|
|
|
|
### USB Host
|
|
|
|
Using OTG cable such as,
|
|
|
|
|
|
|
|
Helios64 can act as USB host and can be connected to various USB device.
|
|
|
|
### USB Device
|
|
|
|
Helios64 can be used as Direct Attached Storage (DAS) with proper configuration and kernel module. Refer to [Helios64 as Direct Attached Storage (DAS) device](#helios64-as-direct-attached-storage-das-device)
|
|
|
|
Helios64 can also used as "USB eMMC reader/writer" for OS recovery purpose. Refer to [USB OTG Port (USB Type-C)](#usb-otg-port-usb-type-c)
|
|
|
|
|
|
## USB under U-Boot
|
|
|
|
### USB Host Port
|
|
|
|
USB Host support in U-Boot is quite minimal, it only support USB storage and USB ethernet.
|
|
|
|
### USB OTG Port (USB Type-C)
|
|
|
|
USB Type C port is configured as USB device mode as USB Mass Storage connected to eMMC.
|
|
This function can be activated by pressing Recovery Button.
|
|
This is to serve as a way to (re)install OS to eMMC.
|
|
|
|
|
|
## USB under Linux
|
|
|
|
### USB Bus Mapping
|
|
|
|
| USB Controller | Bus number | Remarks |
|
|
|----------------|------------|---------|
|
|
| EHCI Host0 | 0 | |
|
|
| EHCI Host1 | 1 | |
|
|
| DWC3 Typec0 USB 3.0 | 2 | |
|
|
| DWC3 Typec0 USB 2.0 | 3 | |
|
|
| DWC3 Typec1 USB 3.0 | 4 | |
|
|
| DWC3 Typec1 USB 2.0 | 5 | |
|
|
|
|
----- ***TBC*** ------
|
|
|
|
### Helios64 as Direct Attached Storage (DAS) device
|
|
|
|
Helios64 can be used as Direct Attached Storage (DAS) device with help of Linux USB Gadget kernel module.
|
|
|
|
The kernel moodule only export the underlying block device NOT the filesystem layer. Therefore if the block device is formatted with filesystem unique to Linux,
|
|
the exported disk may not readable by computer that has Helios64 connected to.
|
|
|
|
For example, the block device is formatted with EXT4 filesystem and Helios64 connected to Windows PC as DAS,
|
|
the Windows PC will not be able to read the disk content unless 3rd party software/driver installed.
|
|
|
|
|
|
!!! warning
|
|
Do NOT access Helios64 simultanouesly as DAS and NAS, as the filesystem is not managed by system and can lead to data corruption.
|
|
|
|
|
|
#### Individual Disk Exported as Separate Disk
|
|
|
|
----- ***more info soon*** -----
|
|
|
|
```
|
|
modprobe g_mass_storage file=/dev/sda,/dev/sdb,/dev/sdc,/dev/sdd,/dev/sde iSerialNumber=1234567890 iManufacturer="Kobol Innovations" iProduct=Helios64
|
|
```
|
|
|
|
----- *** Put Windows Explorer & Disk management screenshot here *** -----
|
|
|
|
|
|
***Helios64 connected to PC running Linux***
|
|
|
|
USB device visualization using [USBview](http://www.kroah.com/linux-usb/)
|
|
|
|
|
|
USB tree using lsusb
|
|
|
|
|
|
```
|
|
$ sudo lsusb -s 2:7 -v
|
|
|
|
Bus 002 Device 007: ID 0525:a4a5 Netchip Technology, Inc. Pocketbook Pro 903
|
|
Device Descriptor:
|
|
bLength 18
|
|
bDescriptorType 1
|
|
bcdUSB 3.00
|
|
bDeviceClass 0 (Defined at Interface level)
|
|
bDeviceSubClass 0
|
|
bDeviceProtocol 0
|
|
bMaxPacketSize0 9
|
|
idVendor 0x0525 Netchip Technology, Inc.
|
|
idProduct 0xa4a5 Pocketbook Pro 903
|
|
bcdDevice 4.04
|
|
iManufacturer 3 Kobol Innovations
|
|
iProduct 4 Helios64
|
|
iSerial 5 1234567890
|
|
bNumConfigurations 1
|
|
OTG Descriptor:
|
|
bLength 3
|
|
bDescriptorType 9
|
|
bmAttributes 0x03
|
|
SRP (Session Request Protocol)
|
|
HNP (Host Negotiation Protocol)
|
|
Configuration Descriptor:
|
|
bLength 9
|
|
bDescriptorType 2
|
|
wTotalLength 47
|
|
bNumInterfaces 1
|
|
bConfigurationValue 1
|
|
iConfiguration 0
|
|
bmAttributes 0xe0
|
|
Self Powered
|
|
Remote Wakeup
|
|
MaxPower 126mA
|
|
Interface Descriptor:
|
|
bLength 9
|
|
bDescriptorType 4
|
|
bInterfaceNumber 0
|
|
bAlternateSetting 0
|
|
bNumEndpoints 2
|
|
bInterfaceClass 8 Mass Storage
|
|
bInterfaceSubClass 6 SCSI
|
|
bInterfaceProtocol 80 Bulk-Only
|
|
iInterface 1 Mass Storage
|
|
Endpoint Descriptor:
|
|
bLength 7
|
|
bDescriptorType 5
|
|
bEndpointAddress 0x81 EP 1 IN
|
|
bmAttributes 2
|
|
Transfer Type Bulk
|
|
Synch Type None
|
|
Usage Type Data
|
|
wMaxPacketSize 0x0400 1x 1024 bytes
|
|
bInterval 0
|
|
bMaxBurst 15
|
|
Endpoint Descriptor:
|
|
bLength 7
|
|
bDescriptorType 5
|
|
bEndpointAddress 0x01 EP 1 OUT
|
|
bmAttributes 2
|
|
Transfer Type Bulk
|
|
Synch Type None
|
|
Usage Type Data
|
|
wMaxPacketSize 0x0400 1x 1024 bytes
|
|
bInterval 0
|
|
bMaxBurst 15
|
|
Binary Object Store Descriptor:
|
|
bLength 5
|
|
bDescriptorType 15
|
|
wTotalLength 22
|
|
bNumDeviceCaps 2
|
|
USB 2.0 Extension Device Capability:
|
|
bLength 7
|
|
bDescriptorType 16
|
|
bDevCapabilityType 2
|
|
bmAttributes 0x00000006
|
|
Link Power Management (LPM) Supported
|
|
SuperSpeed USB Device Capability:
|
|
bLength 10
|
|
bDescriptorType 16
|
|
bDevCapabilityType 3
|
|
bmAttributes 0x00
|
|
wSpeedsSupported 0x000f
|
|
Device can operate at Low Speed (1Mbps)
|
|
Device can operate at Full Speed (12Mbps)
|
|
Device can operate at High Speed (480Mbps)
|
|
Device can operate at SuperSpeed (5Gbps)
|
|
bFunctionalitySupport 1
|
|
Lowest fully-functional device speed is Full Speed (12Mbps)
|
|
bU1DevExitLat 1 micro seconds
|
|
bU2DevExitLat 500 micro seconds
|
|
Device Status: 0x0000
|
|
(Bus Powered)
|
|
|
|
```
|
|
|
|
xfce file manager (thunar)
|
|
|
|
|
|
lsblk output:
|
|
```
|
|
$ lsblk
|
|
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
|
|
sdc 8:32 0 111,8G 0 disk
|
|
└─sdc1 8:33 0 111,8G 0 part
|
|
sdd 8:48 0 111,8G 0 disk
|
|
└─sdd1 8:49 0 111,8G 0 part
|
|
sde 8:64 0 111,8G 0 disk
|
|
└─sde1 8:65 0 111,8G 0 part
|
|
sdf 8:80 0 111,8G 0 disk
|
|
└─sdf1 8:81 0 111,8G 0 part
|
|
sdg 8:96 0 111,8G 0 disk
|
|
└─sdg1 8:97 0 111,8G 0 part
|
|
|
|
$ lsblk -S
|
|
NAME HCTL TYPE VENDOR MODEL REV TRAN
|
|
sda 0:0:0:0 disk ATA WDC WDS240G2G0B- 0000 sata
|
|
sdb 1:0:0:0 disk ATA TOSHIBA MQ04ABF1 0J sata
|
|
sdc 2:0:0:0 disk Linux File-Stor Gadget 0404 usb
|
|
sdd 2:0:0:1 disk Linux File-Stor Gadget 0404 usb
|
|
sde 2:0:0:2 disk Linux File-Stor Gadget 0404 usb
|
|
sdf 2:0:0:3 disk Linux File-Stor Gadget 0404 usb
|
|
sdg 2:0:0:4 disk Linux File-Stor Gadget 0404 usb
|
|
```
|
|
|
|
|
|
|
|
#### RAID device exported as One Disk
|
|
|
|
----- ***more info soon*** -----
|
|
|
|
```
|
|
modprobe g_mass_storage file=/dev/md/md-raid6
|
|
```
|
|
|
|
----- *** Put Windows Explorer & Disk management screenshot here *** -----
|
|
|
|
----- *** Put lsusb & lsblk here *** -----
|
|
|
|
|
|
## Benchmark
|
|
|
|
----- ***more info soon*** -----
|
|
|
|
|
|
## References
|
|
[1] https://www.kernel.org/doc/html/v5.4/usb/mass-storage.html
|